User`s manual

26 ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual
– Select Black & White (1 bit) to scan the image in black-and-white.
– Select Auto Color Detection to scan the image in color or non-color
based on the automatic judgement and detection of the system.
– Select Complex to scan the image in color, grayscale or non-color
based on the customization.
c) Select a dimension in the Paper Size as your
preview image size.
d) Select a desired resolution in the Resolution
for your image output resolution.
f) If “Auto-crop” & “Auto-deskew” is selected, the scanner automatically
detects the size of the original image, crops the full scan frame to fit the
image, and removes unwanted black borders after the scan, as well as
corrects the distorted image for proper alignment.
5. Click the Preview button to perform a preliminary view of the entire image.
When done, a preview image appears in the Preview window. Do not forget
to put the document back on the document feed tray.
6. Go to the “General” panel by clicking the General tab in the Settings window.
Specify the settings for your requirements there.
a) If necessary, specify the image settings
for the front or back side of documents
separately by using the Sides of Material
control when Scan Source is set as “ADF
(Duplex)”.
b) Select the image type in the Document
Type as your input image type.
– Select Photo to scan color prints.
– Select Text to scan text.
c) If necessary, check “Double Feed”, then
select a suitable paper thickness for the
ultrasonic double-feed detection in the
Paper Type options menu to prevent
multiple pages from being fed together
while papers are fed through the ADF.