User`s manual

24 ArtixScan DI 2015c User's Manual
• If you want to scan both sides of the documents through the ADF, click
the “Software Duplex Scan” button and follow the steps below:
a) A “Scan To: Save As” dialog
box appears. Specify your
requirements, then press the
Save button to start scanning
one side of the document.
If ScanWizard DI is launched as a plug-in from an image-editing program, the
scanned image is delivered after the scan to your application, where the image
can be saved, printed, or modified further.
If ScanWizard DI is launched as a stand-alone program, the scanned image
can be saved after the scan to a file, opened in an image-editing program, or
sent to a printer.
For preview purposes only, take note of the additional notes below:
1. Load a piece of paper from the paper stack into the ADF’s Document Feed
Tray as step 1. Do not load more than one sheet, as a single sheet is
sufficient for previewing.
2. After finishing step 4 and before proceeding to step 5, click the Preview
button to perform a preliminary view of the entire image. When done, a
preview image appears in the preview window.
At this moment, the previewed page is delivered to the document tray from the
ADF's Document Feed tray. Load the previewed page, along with the paper stack,
on the ADF's Document Feed Tray. You are now ready to scan.
b) When done, a window will
appear to remind you to turn
over the documents.
c) Turn over and reload your
document. When done, press
the Continue button to start
scanning the other sides of
the documents.