User`s manual

ArtixScan DI 2015c User's Manual 23
Scanning a Stack of Documents
1. Place the stack of documents to be scanned on the ADF's Document Feed
Tray.
2. Launch ScanWizard DI (either as a stand-alone by clicking the program icon,
or by using the “File-Import” or “Scan” command from an application
program).
3. Select ADF (Simplex) as your image input device in the Scan Source drop-
down menu.
4. Follow the procedures (steps 3b through 3e) for “Scanning a Single-sheet
Document" to specify the rests of scanning requirements in the ScanWizard
DI control panel.
a) Select your image output type in the Scan Type drop-down menu.
b) Select a dimension in the Paper Size drop-down menu as your preview
image size.
c) Select your desired image output resolution in the Resolution drop-down
menu.
5. Select the your image type in the Attribute drop-down menu.
6. If necessary, adjust image quality by using the image correction tools.
7. Click the Scan or Scan To button.
• If you want to scan one side of the
documents only through the ADF,
click the “Simplex Scan” button and
follow the steps below:
A “Scan To: Save As” dialog box
appears. Specify your requirements,
then press the Save button. The
scanner will start the scanning
process.
A pop-up window appears, asking about
whether you want to perform smart
duplex scanning function.