User`s manual

ArtixScan 1200DF User's Manual 23
Scanning a Stack of Documents
1. Place the stack of documents to be scanned on the ADF's Document Feed
Tray.
2. Launch ScanWizard DI (either as a stand-alone by clicking the program icon,
or by using the “File-Import” or “Scan” command from an application
program).
3. Select ADF (Simplex) as your image input device in the Scan Source drop-
down menu.
4. Follow the procedures (steps 3b through 3e) for “Scanning a Single-sheet
Document" to specify the rests of scanning requirements in the ScanWizard
DI control panel.
a) Select your image output type in the Scan Type drop-down menu.
b) Select a dimension in the Paper Size drop-down menu as your preview
image size.
c) Select your desired image output resolution in the Resolution drop-down
menu.
d) If “Auto-crop & Auto-deskew” is selected, the scanner automatically
detects the size of the original image, crops the full scan frame to fit the
image, and removes unwanted black borders after the scan, as well as
corrects the distorted image for proper alignment.
5. If necessary, check “Auto Document Rotation”, “Smart Document
Enhancement”, “Remove Blank Page” or “Remove Punch Hole” to enhance
the quality of the scanned images.
6. Select the your image type in the Attribute drop-down menu.
7. If necessary, adjust image quality by using the image correction tools.
8. Click the Scan or Scan To button.
A pop-up window appears, asking about
whether you want to perform smart
duplex scanning function.