User`s manual

ArtixScan 1200DF User's Manual 15
To the Hi-Speed USB Cable
4. Connect one end of the Hi-Speed USB cable to your computer.
5. Connect the other end of the Hi-Speed USB cable to the scanner’s USB port.
6. Turn the the power switch at the back
of your scanner to “On”, and wait for
the light to stop blinking and stay on
steady.
The system will detect your scanner
automatically.
Note: It takes a while for your scanner to
warm up. Please do not turn the scanner
off when it is in the warming-up process;
otherwise, it may cause serious damage to
your scanner.
Power switch
On
Off