Specifications

ArtixScan 4500t Installation and Operation Manual 5
English
Checking the SCSI ID
A SCSI ID is a number assigned to each SCSI device in your daisy chain to differentiate
the devices from one another.
The SCSI ID for Microtek scanners is set at default to 6. You won't need to change the
SCSI ID on your scanner unless another SCSI device on your system (such as a ZIP drive
or CD-ROM drive) is using the same number.
CAUTION
+
6
6
To set the SCSI ID number:
Locate the SCSI ID selector, which is on the back panel. To change the SCSI ID, press the
push-button selector.
Notes on SCSI ID numbers
• Each SCSI device must have a unique SCSI ID number.
• Valid SCSI ID numbers are 0 to 6. Do not use SCSI ID #7, which is used to carry a self-
test for the scanner and make the carriage move back and forth. SCSI ID #8 and #9 are
also not used.