Specifications

ArtixScan 4500t Installation and Operation Manual 33

English

The

DevicesDevices

Devices screen will list any SCSI controllers that may already have installed in your

computer.

NoteNote

Note

: Although IDE CD-ROM drives are not SCSI, because of the way the driver is

implemented, Windows NT 4.0 will still list it on this screen.

4. Click on the

DriversDrivers

Drivers tab, and click on the

Add...Add...

Add... button to select

AdaptecAdaptec

Adaptec on the left

and the corresponding Adaptec card driver on the right to install.

5. Click OK to bring up the following screen.

The SCSI card should now be listed, indicating the driver is installed.

6. Restart your computer.

Q4: What’s the recommended power up sequence?

A4: When using SCSI interface, be sure you have connected the SCSI cable and the

terminator first, then connect the DC power adapter.

Q5: I have followed the above instructions, but still cannot fix the problem.

A5: Visit the web site of the SCSI card provider (e.g., Adaptec or AdvanSys).