Specifications

28 ArtixScan 4500t Installation and Operation Manual
English
System Menu:
The System Menu displays current scanner information, lets you
view the SCSI chain status, and lets you view the About dialog
box of the Scanner ICC Profiler program.
1. Get Current Scanner Info: This command provides informa-
tion on the current scanner. A dialog box appears showing the
scanner model in use, the SCSI ID number of the scanner, and
the firmware version of the scanner.
2. Scanner Probe: This command displays the SCSI devices on the
SCSI chain, as well as the SCSI ID numbers of the individual devices.
To use this command:
1. Choose the Get SCSI Chain Info command.
2. If your scanner does not show in the list,
make sure it is connected and turned on, then
click on the Probe button in the dialog box.
• Choose the correct interface card in the
card selection box.
• Check the numbered box corresponding
to the SCSI ID of your scanner. Click OK to
close the dialog box.
3. About: This command displays the splash screen of the Scanner ICC Profiler program,
including the product logo and the software version number.