Specifications

20 ArtixScan 4500t Installation and Operation Manual
English
Starting Calibration
1. Turn on your scanner and let it warm up for about five minutes.
2. Place the target inside the scanner.
3. Launch the Scanner ICC Profiler calibration utility. The main menu below appears.
A. Choose the media type. Select Positive Film to calibrate.
B. Select the target type that matches your target type and date code. You can verify this
information by looking at the bottom of the target for the date code and the target
type information.
Note: If you are unable to select the target type with date code that matches with the
target you are using, find the Target Profile CD that came with your scanner. In
Macintosh, run Macsetup program; in Windows 95/98/2000/NT 4.0, run Winsetup.exe
on the CD, then restart your computer, the target type with the date code is now
available for selection.
Date code and target
type information