Specifications

14 ArtixScan 4500t Installation and Operation Manual
English
the film.
For standard-sized transparent film
Using the Main Holder
Before placing the standard-sized transparent film, place
For 6 x 6 cm or 6 x 7 cm film
1 Place the film to be scanned
inside the film mount (6 x 6 cm
or 6 x 7cm size), with the film
facing up.
2 Use the Magnetic strips to
secure the film to the film
mounts and position the strips
along the edge, making sure
that the area to be scanned is
not covered by the strips.
3 Place the mounted film in the
Main Holder, and rest the
upper and left edges against
the two guide pins for posi-
tioning. Be careful that the
guide pins do not puncture the
film when you place the film
inside the film holder.
4 Close the Main Holder.
5 Turn the locker to the “Lock”
position.
the Main Holder on an even
surface, turn the locker to the
“Unlock” position, then open it.
For 4" x 5" film
1 Place the film upright and
facing up inside the Main
Holder, and rest the upper and
left edges against the two guide
pins for positioning.
Be careful that the guide pins
do not puncture the film when
you place the film inside the
film holder.
2 Close the Main Holder.
3 Turn the locker to the “Lock”
position.
U
N
LO
C
K
L
O
C
K
UNLOCK
LOCK
U
N
L
O
C
K
L
O
C
K
Film is held
in place by
guide pins
Guide pin
UNLOCK
L
O
C
K
Magnetic strips
Guide pins
Mounted film
LockUnlock
UNLOCK
LOCK
UNLOCK
LOCK