Specifications

8 ArtixScan 4500t Installation and Operation Manual

English

3 Installation

The ArtixScan 4500t installation procedure includes 4 steps:

Step 1: Installing SCSI card

Step 2: Connecting your scanner

Step 3: Using terminator

Step 4: Installing software

Step 1: Installing SCSI card

If your system is SCSI-ready, go to “Step 2: Connecting your scanner” directly to connect

your computer. If your system is not the SCSI-ready, you will need to install a SCSI card.

For the Macintosh:

Install SCSI card if the Mac has no built-in SCSI interface

1. Shut down your Macintosh computer and peripherals, unplug the power cord. Next,

open your computer.

2. Look for an available PCI card slot (typically

white or ivory) in your computer. Remove

the slot cover, and insert the PCI SCSI card

into the slot. Push the card in to make sure it

is seated all the way in the slot. This is

important, as an improper card connection

will make you unable to use your scanner,

and you will then have to remove the

computer case and reinsert the card.

3. Close the computer, then plug the power

cord back in.

For the PC:

Install SCSI card under Windows 95, 98, 2000 and NT

1. Turn off your PC and peripherals, then unplug the power cord. Next, remove the cover

from your computer.

2. Before handling the interface card, touch a metal frame (such as your computer casing)

to discharge any static electricity buildup in your body.

SCSI Card

I C