Specifications

2 ArtixScan 4000tf Installation and Operation Manual
Environmental Requirements
Before unpacking your scanner, make sure that the location where the scanner will be
installed is large enough to allow for easy operation.
• Make sure that the operating environment for the scanner is free of dust and other
contaminants.
• Allow adequate ventilation space (no less than 1 feet) around the scanner.
• Place the scanner on a flat, stable surface that is not subject to vibration.
• Make sure that the scanning surface will not be exposed to direct sunlight or other
sources of bright light.
• Avoid placing the scanner close to sources of extreme cold or heat.
• Avoid connecting the scanner to a power source that might experience power surges.
• Avoid positioning the scanner in the path of heavy traffic where it may get bumped.
• Your scanner should be placed within 3 feet of the computer. Use the FireWire cable
or USB cable that came with your scanner.
Once the scanner has been placed in a suitable location and is ready to be connected to
the host computer, it is time to proceed to installing the necessary hardware and software
components for the scanner.
System Requirements
For Macintosh users
• Mac OS 8.6 or later
Mac OS 9.0 or later (FireWire only)
• Power PC class or later
iMac DV, Mac G3 or Mac G4 (FireWire only)
• 64MB RAM (128MB or more recommended)
• CD-ROM drive (for installing software)
• Color display with 24-bit color output capability
• A FireWire or USB port
For PC users
• Windows 98/98 SE/2000/Me
Windows 98 SE/2000/Me (FireWire only)
• Pentium PCs or later
• 64MB RAM (128MB or more recommended)
• CD-ROM drive (for installing software)
• Color display with 24-bit color output capability
• A FireWire or USB port