Specifications

ManualsBrandsMicrotek ManualsComputer equipmentArtixScan 4000tf

8 ArtixScan 4000tf Installation and Operation Manual

System is Not FireWire-Ready

If your computer does not have a built-in FireWire port or FireWire card, follow the

steps below to install the FireWire card.

Step 1: Installing the FireWire card

1. Shut down the computer and all peripherals, then disconnect the power cord from the

computer.

2. Remove the computer cover and insert the FireWire card into an available PCI slot.

Push the card all the way in and make sure that it is seated in the slot.

3. Put the computer cover back on.

Step 2: Verifying the FireWire status

1. Turn on the computer.

For Windows 2000/Me users:

The system will automatically detect the FireWire card device and will inform you

when it is ready for use.

For Windows 98 SE users:

The system will start to locate the FireWire card

device.

a) When the “Found New Hardware Wizard”

dialog box appears, click

NextNext

to start installation process.

b) The “Add New Hardware

Wizard” dialog box appears,

select “Search for the best

driver” option, then click

OKOK

OK.

(You may be prompted to

insert the Windows CD-ROM

into your CD-ROM drive.)

c) Follow the on-screen

instructions by clicking

NextNext

Next until you have finished installing.

2. Check to see if Windows 98 SE/2000/Me has detected your FireWire card (IEEE 1394)

by going through the

Star Star

Star

t button on the Taskbar.

a) Click

StartStart

Start,

SettingsSettings

Settings, and select

Control PanelControl Panel

Control Panel.

b) From the Control Panel, double-click the

SystemSystem

System icon. For Windows 98 SE/Me,

select

Device ManagerDevice Manager

Device Manager; for Windows 2000, select

HardwareHardware

Hardware, then

Device Device

Device

ManagerManager

Manager.

c) Double-click the

1394 Bus Controller/IEEE 1394 Bus Host Controllers1394 Bus Controller/IEEE 1394 Bus Host Controllers

1394 Bus Controller/IEEE 1394 Bus Host Controllers to

display the status of the device. The FireWire card device should appear on the list

as shown, indicating the driver is installed and the card works properly.