User Guide

USB Installation on the PC

6.Troubleshooting

To test to see if your scanner is working properly,

follow the steps below.

1. In Windows, click Start, Settings, and select

Control Panel. Double-click the System icon in

Control Panel, then select Device Manager

from the top.

2. Double-click Imaging Device or Microtek

Scanners. Verify that your scanner is listed here.

Click “OK” to close all dialog boxes.

3. In Windows, go to “Start, Programs, Microtek

ScanWizard 5 for Windows”, and select Scanner

Test. When started successfully, the screen

below appears.

4. Place your document face down on the scanner

glass, and click on the Flatbed button in the

Microtek ScanTest window.

5. A preview of your image will be displayed in the

Microtek ScanTest window. Click OK, and exit

Microtek ScanTest; you are now ready to scan.

If you encounter problems with the scan test or

with installation in general, see the digital file

USB_Troubleshooting.pdf in the Techinfo folder on

your Microtek CD-ROM, or visit Microtek’s online

technical support site at http://

www.support.microtek.com.