User's Manual

WEM DESCRIPTION (cont’d)

2. ETHERNET PORT

Standard RJ-45 connector – each WEM has 2 ports 90 degrees opposed to each other for

horizontal and vertical polarity selection.

3. ROTARY CHANNEL SELECT SWITCH

Shows switch settings for channels 0 – 9. *Note: Channels 0, 1 and 2 are the same

frequency.

POWER INJECTION MODULE (PIM)

Note: The Power Injector Modules are not weatherproof units and must be protected from

moisture.

PIM DESCRIPTION

A. TOP VIEW

1. ETHERNET IN – Connect to Ethernet device

2. POWER IN – 12-20 VDC Center Positive

3. ETHERNET OUT – Connect to WEM

B. RIGHT SIDE VIEW

1. POWER LED – Lit when power is on

2. ETHERNET OUT – Connect to WEM

3. POWER IN – Connect to Power Supply

C. LEFT SIDE VIEW

1. ETHERNET IN – Connect to Ethernet device

- 5 -