Specifications

4 How to Order
4.1 Ordering Form
4.1.1 Drive Configurator
It is possible to design a frequency converter according to
the application requirements using the ordering number
system.
Order the frequency converter as either standard or with
integral options by sending a type code string describing
the product a to the local Danfoss sales office.
The type code is a string of characters describing the
configuration, for example:
FC-102N132KT4E21H1XGCXXXSXXXXAGBKCXXXXDX
From the online drive configurator, a customer can
configure the right frequency converter for a given
application and generate the type code string. The drive
configurator automatically generates an 8-digit sales
number to be delivered to the local sales office.
Another option is to establish a project list with several
products and send it to a Danfoss sales representative.
The drive configurator can be found on the global internet
site: www.danfoss.com/drives.
The tables of type codes and configuration options
includes frame sizes A, B, and C. For detailed information
on those frame sizes, see the relevant design guide.
Example of a Drive Configurator interface set-up:
The numbers shown in the boxes refer to the letter/figure
position in thettype code string, read from left to right.
Product groups 1-2
Frequency converter series 3-5
Power rating 8-10
Phases 6-9
Mains voltage 10-11
Enclosure 12-14
RFI filter 15-16
Brake 17
Display (LCP) 18
Coating PCB 19
Mains option 20
Adaptation A 22
Adaptation B 23
Software release 24-27
Software language 28
A options 29-30
B options 31-32
C0 options, MCO 33-34
C1 options 35
C option software 36-37
D options 38-39
Table 4.1 Type Code Character Positions
4.1.2 Type Code String
FC - T H
130BB565.10
X SABCXXXX
12345678910 11 12 13 14 15 16 17 18 19 20 302221 23 272524 26 28 29 31 373635343332 38 39
X0 D
Illustration 4.1 Example Type Code
How to Order VLT® HVAC Drive FC 102 Design Guide
MG16C102 - Rev. 2013-08-20 61
4
4