Datasheet

microtech GmbH electronic Teltow
Chip resistors - Made in Germany
Page 26 Catalog microtech GmbH electronic
ISO/TS 16949:2009
H
t
W
L
T
High power series
Type: CLF
Sizes: 1210, 1218, 2010, 2512, 2040
Characteristics:
• Chip resistors in thick film technology
• Special layout for high electrical load
• Resistance area coated with glass and varnish passivation
• High stability and reliability
• Tight tolerances (≥0,5%) – low temperature coefficient (≥50ppm/K)
• RoHS-conform
• Customer specific barcodes available - also in 2D
• All sizes can be manufactured with the following contact variants
⇒ Electroplated alloy resistant tinned
⇒ Contact with low rest permeability -N, suitable only for reflow soldering method
⇒ Epoxy bondable contact -K
⇒ Special corrosive gas resistant contact –S, Sulfur resistance verified according to ASTM B 809
Dimensions (in mm):
Packaging units:
Reel Card tape Blister tape
Ø
acc. EN 60286-3
180 mm
5 T pcs. 4 T pcs.
10 T pcs. 8 T pcs.
330 mm
20 T pcs. 16 T pcs.
Samples possible up to 50 pcs./value
Ordering information:
CLF - N 1210 100k 1% 100ppm/K K P
5
(optional)
Type Contact Size
R-
Value
± Tolerance ± TCR
Marking Packaging
pcs. / Reel
(T pcs.)
CLF Standard (without
add.)
-N (non magnetic)
-K (epoxy bondable)
-S (corrosive gas
resistant)
1210
.
to
.
2040
1R
.
to
.
10M
0,5
1
5
50
100
K- only with P- Card tape
B- Blister
tape
S- Bulk
Depends on
size and
packaging
unit
Size
L
Length
W
Width
H
Depth
t
Contact
back
T
Contact
Front
Min Max Min Max Min Max Min Max Min Max
1210
3,00 3,30 2,35 2,65 0,50 0,75 0,35 0,85 0,25 0,85
1218
3,00 3,30 4,50 4,80 0,50 0,75 0,35 0,85 0,25 0,85
2010
4,80 5,20 2,30 2,70 0,50 0,75 0,35 0,85 0,25 0,85
2512
6,10 6,50 3,00 3,30 0,50 0,75 0,35 0,85 0,25 0,85
2040
4,90 5,30 10,05 10,35 0,50 0,75 0,35 0,85 0,25 0,85