User Guide

Microtech Designs
microtechdesigns.com.au
[e-mail]
5
6. The sixth option is Radar INT - this is used to adjust the time
between radar reads when in precesnse mode. The default value is
60 seconds, and can be adjusted from 5 to 180 seconds.
6
Press SET to alter. Use Up or Down buttons to change and SET
to confirm. If no further changes need to be made, press the
UPLOAD button to upload the new settings. Once upload is
complete, the screen will display Settings Applied.
Batteries
In order to replace the two AAA batteries, first remove the three screws on the back of the device.
Then remove the plate, and replace the two batteries. Then reinstall the plate and screws.