User Guide

How to insert Microsone into the ear
After choosing which ear you want to wear the Microsone, take it between thumb
and forefinger so that indent in Microsone is facing out from your ear and
downward.
Carefully guide the earpiece into your ear canal. Ensure that the earpiece sits as
far as possible inside the ear canal, as well as in the best and most comfortable
position. Twist the Microsone gently into place to ensure the best fit, with the
indent of Microsone now pointing upwards.
To remove the Microsone, use your thumb to push from behind your ear outward
to pop Microsone from the ear canal.
How to clean Microsone
Always ensure that the Microsone Earpiece is clean before using it. The speaker
section should be clear of any previous earwax or build-up for best results.
Use a sanitized alcohol wipe to thoroughly clean around Microsone’s entire
surface. Do not use any tools or strong detergents which may damage the finish of
the Microsone.
Battery end of life
The user will be warned with a beep sequence that the battery is near empty. Be
prepared to switch to your second, fully charged Microsone.
Out of Range
When Microsone is out of range or disconnected from Control Pack, the user will
hear two low beeps indicated a loss of connection.
©Halter Technical LLC
Page 8