User Guide

Microsones & Charging Case
Powering On & Off
To power your Microsone on, remove it from the Charging Case. A chime will
sound to inform you that the Microsone is indeed powered on.
To power your Microsone off, simply place it back into the Charging Case
Pairing Microsone with Control Pack
Upon powering on, Microsone will search for its most recent pairing. If it is within
Bluetooth range of its most recent pairing, it will connect and begin receiving
audio. If it does not immediately connect to its most recent pairing, Microsone will
automatically enter pairing mode and be ready to pair with Control Pack.
Use the Control Pack menu to navigate to Bluetooth Pairing. Your Microsone and
Control Pack will be paired.
Remember that Microsones are individual units and not a matched pair. They will
each need to be paired individually with the Control Pack. Once each Microsone
has been paired with Control Pack, they will remember their pairing until manually
unpaired or paired with another device.
Pairing Microsone with another device
To pair Microsone with another Bluetooth transmitter, such as a phone, remove the
Microsone from the Charging Case and wait for it to enter pairing mode. Follow the
pairing process for your device to select Microsone as the Bluetooth receiver. If
using your phone, Microsone will appear in the available Bluetooth devices. Select
to pair.
©Halter Technical LLC
Page 7