User Guide

Frequency Tuning

Control Pack has 4 banks of programmable frequencies. Banks 1 and 2 are for

frequencies 174-217MHz, while banks 3 and 4 are for frequencies 470-608MHz.

Select Frequency Bank and Channel

To switch between frequency banks, press the SELECT button. The bank number

will begin to flash. Scroll through the banks by pressing UP or DOWN. Press

SELECT again to begin changing the channel number within that bank. Scroll

through channels by pressing UP or DOWN. Press SELECT again to lock in that

particular bank and channel.

Programming Frequency Channels

After selecting the bank and channel to be edited, press UP and DOWN

simultaneously to enter frequency programming mode. A digit in the frequency will

begin flashing to indicate editing status. Press UP or DOWN to scroll through the

digits. Pressing SELECT will move the indicator to the next digit to edit. Use this

method to choose your intended frequency. Press SELECT after the last digit to

lock in the frequency. This frequency is now automatically stored as that particular

channel number on your selected bank.

Page 12