User Guide

Powering Control Pack

Control Pack can be powered by either AA batteries, or by 5V power through the

USB port. To power on Control Pack, rotate the volume knob clockwise to the on

position. To power off, rotate the volume knob counter-clockwise until Control

Pack clicks into the off position

To open the battery door, press the recessed button on the bottom of Control

Pack. The battery door opens to the right side. Be sure to load batteries into

Control Pack with each polarity facing in the correct direction. There are + and -

indicators on the back of Control Pack to identify how to correctly insert batteries.

Adjusting volume level

The volume knob will control the volume for each Microsone paired with the

Control Pack, as well as any headphone connected to the headphone output

connector.

Page 10