User Manual

ManualsBrandsMicrosoft ManualsElectronicsXbox 360 Wireless Racing Wheel with Force Feedback

Part Number X12-35437-01

XBOX 360 WIRELESS RACING WHEEL WITH FORCE FEEDBACK

MS Color Bar v.5 030801

360 123 172 279 XBOX 100 75 50 25 100 75 50 25 100 75 50 25 100 75 50 25

CYAN MAGENTA YELLOW BLACK

Microsoft Xbox Xbox Monaco (Race Wheel) 4c Cover

07/28/06 m1p2

X123543701cvr

Don Fitzwater

35259

AKH

Mechanical

Summary of content (5 pages)

PAGE 1
MS Color Bar v.
PAGE 2
Xbox 360 Wireless Racing Wheel with Force Feedback 2 17 English Fraçais Español English Thanks for choosing the Xbox 360 Wireless Racing Wheel with Force Feedback. The racing wheel provides high performance through a combination of force feedback and authentic automotive details. Photosensitive Seizures Musculoskeletal Disorders • A 10-inch steering wheel.
PAGE 3
Photosensitive Seizures Musculoskeletal Disorders A very small percentage of people may experience a seizure when exposed to certain visual images, including flashing lights or patterns that may appear in video games. Even people who have no history of seizures or epilepsy may have an undiagnosed condition that can cause these “photosensitive epileptic seizures” while watching video games.
PAGE 4
set uP Your racing Wheel connect the Pedal base to the racing Wheel RJ-11 port Pedal left Pedal right NOTE The racing wheel requires a straight-through RJ-11 cable (included). Do not use a crossover RJ-11 cable with the racing wheel. attach the table clamp The racing wheel can be used for either lap or table mounting. The table clamp stabilizes the wheel during gameplay—especially convenient when force feedback is engaged.
PAGE 5
To move the clamp to another location, pull the quick-release lever, loosen the screw, and slide the clamp off the table. attach the racing Wheel to the clamp To attach the racing wheel to the table clamp, angle it toward you so that the guide pins on the clamp fit into the corresponding sockets on the base of the racing wheel. Take care not to pinch your fingers. Once aligned, press down on the back of the racing wheel until it clicks into place.