User`s guide

TouchWare for Windows NT User's Guide86
Controller and Firmware Information
The top portion of the Status box shows the controller’s output
identity, hardware version, firmware version, and results of the
self-test.
The output identity is a combination of the hardware version and the
firmware version. If the touchscreen is found, Microcal uses the
following format to identify the controller:
CcXxxx
where:
Cc = Two characters that describe the type of controller.
Characters Controller Type
A3 Serial/SMT, Serial/SMT2, Serial/SMT3V,
and Serial/SMT3RV controllers
A4 PC Bus controller
P5 TouchPen controller
Q1 Serial/SMT3, Serial/SMT3R, and
MousePort controller
TG ThruGlass controller
Note that Microcal also displays this information in the
Hardware Version field in the Status box.
Xxxx = Four digits that indicate the firmware version. The first
two digits represent the version number; the last two
digits represent the revision level. For example, 0380
means Version 3, Revision 8 (that is, 3.8).