User`s guide

TouchWare for Windows NT User's Guide78
Overview of the Microcal Files
MicroTouch delivers the Microcal Diagnostic utility on the TouchWare
for Windows NT diskette.
Chapter 1 describes how to copy the self-extracting Microcal file to
your hard disk and run the file. The instructions recommend that you
place the Microcal files in the C:\MTSNT directory. You can specify
a different directory during the installation process. If you did not
copy and run the Microcal file, do so now following the instructions in
Chapter 1.
If you are using a MS-DOS boot disk, you must have a copy of the
Microcal files on the diskette.
Table 9 lists the files associated with the Microcal Diagnostic utility.
Table 9. Microcal Files
File Name Purpose
MICROCAL.EXE Microcal Diagnostic utility
MICROCAL.HLP
QUICKCAL.HLP
Help files for the Microcal Diagnostic utility
MCAL.OVL
QCAL.OVL
Overlay files for the Microcal Diagnostic utility
Running Microcal
Microcal is a DOS application. Before running Microcal, you must
exit from Windows NT. You cannot run Microcal from a DOS
session within Windows NT. Additionally, Microcal cannot test the
touchscreen while other applications are in use.