User`s guide

Chapter 3 Using the Pen 75
Selecting a Hardware Touch Mode
Use the Hardware Touch Mode options in the Touchscreen Control
program’s Advanced Settings dialog box to select the hardware touch
mode.
To select a hardware touch mode:
1. Open the Touchscreen Control program and select Advanced
Settings.
2. In the Advanced Settings dialog box, select a hardware touch
mode.
3. Click Apply or OK.
Note:
Change the hardware touch mode setting only if your
touchscreen is using a TouchPen controller. If you are not using a
TouchPen controller, the utility ignores your selection and makes no
changes to the current configuration.
Performance Considerations with a TouchPen Controller
The following settings affect touchscreen performance:
Hardware touch mode
Communication (baud) rate
Double-click speed