User`s guide

Chapter 2 Customizing Your Touchscreen Environment 61
If the Initialize Option is Not Selected
The touchscreen driver bypasses its initialization sequence and the
system loads the driver.
You may want to bypass the touchscreen controller initialization if you
want to load the touchscreen driver before attaching a monitor or the
controller to your system.
You can perform the controller initialization again using the
Re-initialize button in the Hardware Controls dialog box.
Displaying Messages at Startup
The Display Messages at Startup option enables or disables the display
of driver load messages on the text mode startup screen when the
driver loads. Displaying messages is a helpful aid when
troubleshooting problems.
Loading the Driver if Initialization Fails
The Load Always option controls whether the driver loads if it fails to
initialize the touchscreen controller.
If the Load Always Option is Selected
If the touchscreen controller initialization fails when you boot your
system, the system loads the driver.
You can perform the controller initialization again using the
Re-initialize button in the Hardware Controls dialog box. You may
want to reinitialize the touchscreen controller if initialization failed
because power was not supplied to the controller or the controller was
not connected to the computer when the system booted.
If the Load Always Option is Not Selected
If the touchscreen controller initialization fails when you start your
system, the system does not load the driver.
The default setting for Load Always is off (the driver will not load if
initialization fails).