User`s guide

TouchWare for Windows NT User's Guide58
Restoring Button Mode Default Values
If you change the predefined button modes, you can restore all of them
using the Defaults button. You can restore a single button mode by
manually changing its values back to the original settings.
Restoring all Predefined Button Modes
Use the Defaults button to restore all of the predefined button modes’
default values.
To restore all predefined button modes’ default values:
1. Open the Button Modes dialog box.
2. Click on Defaults.
A dialog appears informing you that this will restore the default
button settings and that custom button modes will be preserved.
You are asked to confirm whether you want to continue.
3. Select Yes to restore the default button modes.
The predefined button modes are restored and the default button
mode appears in the Current Button Mode box.
Restoring a Single Predefined Button Mode
To restore a predefined button mode to its default values without
losing your changes to other predefined button modes, you must
manually change the button mode’s values. Refer to Table 6 for the
predefined button modes’ default values.
To restore a predefined button mode’s default values:
1. Open the Button Modes dialog box.
2. Select the button mode from the Current Button Mode drop-down
list.
3. For each of the 6 events, choose the default touch trigger from the
Event drop-down list.
4. Select Apply or OK.