User`s guide

Chapter 1 Installing TouchWare for Windows NT 33
3. Touch the target in the lower left corner. When calibrating a
touchscreen, make sure you
Face the monitor directly.
Perform the calibration in the position (sitting or standing) you
expect to use the touchscreen.
Touch the calibration targets slowly and accurately. The
system does not register the touch point until you lift off the
screen.
Note:
If you do not touch the screen within thirty seconds, the
system automatically cancels the calibration process. In this case,
there is no change to the current calibration settings.
4. Touch the target in the upper right corner.
After you touch the second target, a dialog box reports that the
calibration was successful.
5. Select OK.