User`s guide

TouchWare for Windows NT User's Guide26
Running the Setup Program from Windows NT 3.51
After checking the ReadMe file, copying the Microcal files, and
uninstalling version 1.01 (if necessary), run the Setup program to
install TouchWare for Windows NT.
To install TouchWare from Windows NT 3.51:
1. Log into the system as system administrator.
2. Start Windows NT 3.51. Make sure no other applications are
open.
3. Insert the TouchWare for Windows NT diskette into a disk drive.
4. Access the Program Manager.
5. Open the File menu and choose Run. In the Command Line box,
type the following command:
A:\SETUP (or B:\SETUP, depending on the drive)
6. Select OK. The Setup program begins to display a series of dialog
boxes requesting information for the setup.
7. Follow the instructions displayed on the screen. Make your
selections carefully when answering questions to complete the
installation. If you need more information on the installation
dialog boxes, refer to the following sections.
After completing the software installation, restart your system. You
must restart your system in order to load the touchscreen driver and
activate the touchscreen.