User`s guide

Chapter 1 Installing TouchWare for Windows NT 19
3. Type the following command:
TYPE drive-designator:\README.TN | MORE
where drive-designator is the letter that represents the diskette
drive you are currently using. For example, use A: if you are using
Drive A.
4. Press Enter to display the document. Continue to press Enter to
display the next screen of information.
To print the ReadMe file from MS-DOS:
1. Insert the TouchWare for Windows NT diskette into the diskette
drive.
2. Access the MS-DOS command prompt.
3. Type the following command:
PRINT drive-designator:\README.TN
where drive-designator is the letter that represents the diskette
drive you are currently using. For example, use A: if you are using
Drive A.
4. Specify the printer name if you are prompted for one.
Copying the Microcal Files to Your Disk
MicroTouch delivers the Microcal utility on the TouchWare for
Windows NT diskette. Microcal is not part of the standard
installation. You must manually copy the file to your disk drive.
If you do not have MS-DOS running on your system, you must have a
MS-DOS boot disk. You will copy the Microcal files to the MS-DOS
disk.
Copying Microcal Files to a System Running MS-DOS
First, copy the Microcal file, named MICRO.EXE, to your disk drive.
You then need to run the file, which is a self-extracting file, to extract
the five files associated with the Microcal utility.