User`s guide

TouchWare for Windows NT User's Guide112
However, you may want to adjust the touch sensitivity for differences
in systems and touchscreen implementations. Please contact
MicroTouch Technical Support if you need to change the sensitivity
setting.
Data Protocol
The data protocol defines how the controller sends information to and
receives information from the PC. The default protocol is decimal
format and stream mode.
The Data Protocol option lets you select the format and mode for how
the controller communicates with the touchscreen. When the setting is
entered, the change occurs immediately.
To set the protocol:
1. Select Configure from the Microcal Main menu.
2. Select Data Protocol.
A dialog box prompts for confirmation that you want to change
the controller’s default format and mode.
3. Type Y. The following menu appears:
4. Select one of the following options:
To return to the default setting of format decimal and mode
stream, choose Factory Default.
To set a new protocol, choose Select Protocol to open the
Protocol menu.