User`s guide

Chapter 4 Using the Microcal Diagnostic Utility 111
Resetting Microcal
To reset Microcal to its initial state, press F6.
When you reset Microcal to its initial state, the system
Resets all menu options.
Sets the communication settings to the defaults.
Sets the Status box to
Search not activated
.
You need to select the Find Touchscreen option before you can select
other Microcal options.
Configuration Settings
Depending on the type of touchscreen controller attached to your
system, Microcal may include a Configure menu.
The Configure menu lets you change the following settings: sensitivity,
data protocol, AutoBaud detection (and baud rate), and
communication parameters.
Adjusting the Sensitivity
MicroTouch sets the sensitivity of each touchscreen during the
manufacturing process. The default sensitivity is optimal for most
touch applications.