Installation guide

Windows NT Installation Guide40
Post Code (hex) Description
08 Memory control register written
09 Memory bank 0 register written
0B DRAMs awakened
0C Memory sized and memory bank 0 written
0F Bcache turned on
13 All of memory rewritten (good data parity written)
14 Memory errors cleared; start reading system ROM
15 Loading ROM without SROM decompression
16 Loading ROM using SROM decompression
17 System ROM loaded to memory
18 Icache flush code written to memory
19 CPU errors cleared; jump to system code
3A Jumping to SROM Mini-Debugger
3F Fatal error. Second code identifies source of error:
05 = No SIMMs found when sizing memory
06 = Checksum error detected when image was read back from
memory
07 = Could not detect SIMM type during memory sizing