Installation guide

Windows NT Installation Guide24
Boot menu . . .
Supplementary menu . . .
Setup the system . . .
Machine specific setup . . .
Partition Disks . . .
Starts the disk partition utility. See Section 3.6 for information about
this utility.
Boot menu . . .
Supplementary menu . . .
Setup the system . . .
Machine specific setup . . .
Setup menu . . .
Returns you to the Setup menu.
3.5 Firmware Update Utility
If you have an EB64+ or EB66 motherboard, see Section 3.5.2 for directions on
how to update your firmware.
3.5.1 Updating Firmware in a Flash ROM
The following procedure updates the flash ROM using the firmware update
utility. (To start the firmware update procedure, see Section 3.4.2.)
1. From the Firmware Update menu, choose whichever selection appears:
• Update Windows NT ARC firmware.
• Update Firmware.
2. When prompted to continue the update, choose Yes. If the console selection
does not match the firmware that you flashed, you will be prompted to
update the console selection.
3. If you are prompted to update the console selection, choose Yes.
4. When the update has completed, restart your computer.