Installation guide
Windows NT Installation Guide6
To enter standard CMOS Setup:
1.
Start AlphaBIOS Setup.
2.
Select CMOS Setup.
3.
Press Enter.
To enter advanced CMOS Setup:
1.
Start AlphaBIOS Setup.
2.
Select CMOS Setup.
3.
Press Enter.
4.
In the CMOS Setup screen, press F6.
2.4.1 Setting Up Your Hard Disk
Express hard-disk setup is an easy way to create the recommended partition
arrangement on your first hard disk, disk 0. Note, however, that express hard-
disk setup does not format the large partition with NTFS. You will have the
opportunity to do this during the Windows NT installation.
Note: AlphaBIOS assigns “disk 0” to the hard disk with the lowest SCSI ID
number on the first bus in your system. If no SCSI devices are present,
AlphaBIOS assigns disk 0 to the first IDE hard drive.
Caution: If you have any information on your disk that you want to save, be
sure to back it up before using express hard-disk setup.
To perform express hard-disk setup:
1.
Start AlphaBIOS Setup.
2.
Select Hard Disk Setup.
3.
Press Enter.
4.
Press F7 to enter express hard-disk setup.
5. Press F10 to continue with the setup.