User manual

3. Push the card down and slide the metal latch over the T-FLASH card to secure it into place.
2.3 Battery information
2.3.1 Installing the Battery
1. Insert the battery by aligning the exposed copper part of the battery pack with the protruding copper
conductor, and then gently push the bottom of the battery into place.
2. Slide the cover on the phone.
2.3.2 Charging the Battery
When the battery is drained below normal working value, the screen displays an empty battery icon and
sound an alert. Charge the battery immediately upon notice to avoid losing data saved to the phone. If
proper action is not taken to recharge the battery, the phone will automatically shutdown after the battery
life is depleted.
The phone contains a rechargeable lithium battery. The phone is designed to use only manufacturer-
specified original chargers and batteries, to ensure the longevity of the phone.
¾ Insert the charger plug into the USB charger port carefully.
¾ When charging in the power off status of the phone, connect the USB charger to the external power
source, and the battery icon in the phone screen will begin flickering. If charging in the switch-on status
of the phone, the display screen will show a notice of “charging now”. The phone can still be used
while charging.
¾ Before the device’s first use, charge the battery by using the accessory charger for a full 8-10 hours.
Charging fully will ensure that the battery reaches its best performance after two or three times of full
charge and discharge cycles.
¾ When the battery is fully charged, the battery indicator icon will stop flickering. If the phone is powered
off, the display will show “charging is completed!”
¾ Disconnect the connections between the charger and the phone when charging has completed.
Note: The accessory USB data cable has the charging function too in connecting the phone and the
computer. However, because the voltage provided by the USB port of the computer cannot meet
the charging requirements of the phone completely, using USB data cable to charge the battery
will affect the longevity of the battery. We advise you to charge the battery by using the battery
charger.
2.4 Power on/off
Press the Power key for several seconds to power on/off your phone. When no SIM card is installed, a
prompt will appear on the display.