User manual

Note: Each time you dial, you will need to activate the Modem for it to connect normally.
16.4.2 Using USB connection
Install USB modem driver to PC: From the Connection screen,
select Modem Connection > USB to activate the setting, then connect
phone to PC with USB cable and the Windows OS will automatically
search for the correct driver to install.
After installation is complete, one new modem appears in Phone and
Modem options on Control Panel. This indicates that the USB Modem
driver has been correctly installed.
Approach to dialing to use USB Modem connection: From the
Connection screen, select Modem Connection > USB, then press the
RSK to activate it. Connect the phone to PC with the USB cable, run
USB Modem application, enter CMNET in APN and click DIAL. The PC
will automatically connect to Internet.
Screen Shot 16.4.2a
Screen Shot 16.4.2b