User manual

12.8.1 Wireless Manager
Wireless Manager allows you to manage and view the status of
GPRS/UMTS or Wireless LAN connections. You can use the device’s
Power Save Mode to make optimal use of the battery under the WLAN
networking environment, view a variety of data related to the current
configuration and signal quality, and increase network security. To run a
Wireless LAN on your device, access to broadband Internet and an
access point or router that emits WLAN signals is required. If you do not
have access to broadband Internet, consult your ISP before you try to
run this utility. However, the availability and range of your device’s
WLAN signal depends on the number, infrastructure, and other objects
through which the signal passes.
Note: To activate a second-generation network like GPRS on your device and communicate with
other devices on the network, you must have a SIM or USIM card installed on your device.
12.8.2 Beam
Via an infrared interface on this phone, you can enable transfer and
send data to other infrared storage devices.
12.8.3 Various settings of network connections
This phone allows connections to both the Internet and WAP. Therefore,
you are provided with various means of connecting to a network,
including dial-up, GPRS, proxy and VPN. Additional connection
schemes can be added for the various means of connection or
modifications to the existing schemes can be performed.
Note: Factory settings for this device should suffice for network connections. If you modify
connection schemes, restore factory settings by selecting the Reset option.
Screen Shot 12.8.1
Screen Shot 12.8.2