User manual

Change Name/AP Setting/IP Setting
• Name: Name for wireless network.
• AP Setting: Setup AP-related parameters, i.e., ESSID, Authentication, and Password.
• IP Setting: Set TCP/IP for wireless LAN. User can choose to auto-retrieve IP Address or use a
static IP Address.
• Select Menu > Scan AP to starts auto-scanning for available APs. A list of available access points
is presented displaying each access point’s signal strength. Select from the list of available APs to
complete connection setup. ESSID has been assigned and IP address has been auto-retrieved.
This device supports up to 16 profiles. To connect to a WLAN, the device automatically uses the default
profile. If a default profile has not been defined, the phone will select the best signal profile.
12.2.2 SIP Phone
Before the SIP phone feature can be
used, the following settings must be
enabled.
Click Start > Settings > Wi-Fi > SIP
phone. Click New to set up a new
SIP account.
1. In Name specify a name for your
SIP accounrt.
2. In SIP phone account fill in the
information required, such as User name, Authentication Name, Password, Server address, Port, Proxy,
and Proxy port, all of which have been provided with your phone at purchase.
User name: Chosen or assigned sequence of letters and/or numbers, when logging on at
the sip registrar serve.
Authentication name: A sequence of letters and/or numbers which is used to authenticate at the
registrar server.
Password: A sequence of letters and/or numbers which is used to authenticate at the
registrar server.
User ID: An chosen alias or form name similar to the user name.
Register server: Simply a computer in a network that contains the information about which
computer where any particular member of staff is located.
Prot: Used to listen to the SIP message arrived/sent to the register server.
Proxy server: A proxy server supplies the service to find routes for SIP requests or
responses.
Port: The port is used to listen to the SIP message arrived/sent to the proxy server.
Sip Service Lookup: Queries which services are supplied within the register domain.
Screen Shot 12.2.2-1&2