User manual

12.2 WiFi
Screen Shot 12.2
Check for a Wireless LAN signal
Before you start a Wi-Fi connection, verify that your device has access
to a Wireless LAN channel signal. You can check the current wireless
connection status from the following three screens on your device.
1. Home screen: If your device discovers a Wireless LAN
connection, a connection icon appears in the status bar. In
addition, a icon appears in the top-right corner.
2. Wireless Manager: The current connection status and signal
quality for each specific wireless channel appears on the
Wireless LAN Manager screen with the current configuration.
3. Configure Wireless Networks screen: This screen displays
the wireless networks currently available and allows you to add new ones if available.
Note: WLAN (Wi-Fi) is the default wireless channel setting for your device. However, GPRS launches
by default if your device does not detect a Wi-Fi signal.
12.2.1 Wi-Fi Connection
• Click Start > Settings > Wi-Fi, then enter Connections. Following the instructions on the screen, you
can either click New to connected to a new access point, or select Menu > Scan AP to allow the
device to scan for available access points.
Screen Shot 12.2.1