Owner's manual

Note: Specifying the selection profile in the deployment task sequence will make the task sequence applicable

to Surface Pro 3 only. Selection profiles can also be specified with model specific deployment share rules. See

the Customizing Rules for Automation section of Chapter 5.

Preparing Boot Media

Preparing boot media is comprised of two separate steps, each of which is described in this chapter:

 Generating boot media – creates the media that the target deployment computer boots from.

 Configuring network boot – configures the environment that enables the boot media to read the deployment

share on the deployment server.

The concept of boot media is described in more detail in Chapter 2.

Generating Boot Media

After the task sequence is created, you need to generate the boot media to be used on the Surface Pro 3 device that will

connect to the deployment share (including access to the task sequence and source files). To generate boot media,

follow these steps:

1. In the MDT Deployment Workbench, expand the deployment share.

2. Right-click the name of your deployment share and click Update Deployment Share. This launches the Update

Deployment Share Wizard, as shown in Figure 3.26.

Figure 3.26: Update Deployment Share Wizard.