User's Manual

Using the SU-2 Image Viewer

mode is 8 seconds. Sending new image(s) replaces all images in the SU-

2 Image Viewer’s memory. Switching off the SU-2 Image Viewer erases

all images from its memory.

Viewing images with the SU-2 Image Viewer

You can view images one by one or in slide show mode. If you send more

than one picture to the SU-2 Image Viewer at a time, the pictures are

automatically displayed as a slide show.

Power on/off/rotate button

• To switch on the SU-2 Image Viewer, press the button briefly (3 s.),

then release it.

• To switch the SU-2 Image Viewer off, press the button briefly (3 s.)

• To rotate an image 90 degrees clockwise, press the button briefly

(less than 3 s.). Each keypress rotates the picture one step.

Pause/continue/time change button

• To pause a slide show, press the button briefly (less than 3 s.)

• To continue a slide show, press the button briefly (less than 3 s.)

• To switch the length of the time display times between 8 and 4 s.,

press the button briefly (3 s.)

When you send pictures to the SU-2 Image Viewer, the power/Bluetooth

status indicator light blinks. If during the image transfer the connection

between the phone and the SU-2 Image Viewer fails, the connection

failure icon appears on the TV screen. Resend the image again. Note that

you can pair up to 10 devices with the SU-2 Image Viewer and send

images from one device at a time.

Using the SU-2 Image Viewer with several paired phones

The SU 2- Image Viewer can be paired with up to 10 phones, but it can

be connected to only one phone at a time.

If the SU-2 Image Viewer is switched on within 10 metres of several

paired phones, it tries to connect to the phone that was first paired with

the SU-2 Image Viewer.

SU2_en1.fm Page 10 Tuesday, March 11, 2003 11:00 AM