User Manual

Connecting to a Previously Bonded / Paired Phone
The following will show the steps required to connect to a previously bonded / paired phone.
Using the button and the buttons on the ACM, proceed as follows:
1. Press MUTE/PHONE to access the main menu.
2. Use SEEK buttons to navigate to BLUETOOTH and select using MUTE/PHONE.
3. Once inside the Bluetooth directory navigate to SELECT PHONE and select using MUTE/PHONE
4. Use SEEK buttons to navigate to desired phone and select using MUTE/PHONE. The ACM will
then display "connecting". You should then see the name of your phone and then "connected."
Deleting a Previously Bonded / Paired Phone
The following will show the steps required to delete a previously bonded/paired phone.
Using the button and the buttons on the ACM, proceed as follows:
1. Press MUTE/PHONE to access the main menu.
2. Use SEEK buttons to navigate to BLUETOOTH and select using MUTE/PHONE.
3. Once inside the Bluetooth directory navigate to DELETE PHONE and select using MUTE/PHONE.
4. Use SEEK buttons to navigate to desired phone and select using MUTE/PHONE. The ACM will
then display "CONFIRM DEL". Press MUTE/PHONE and the phone will be deleted.
Deleting All Previously Bonded / Paired Phones
The following will show the steps required to delete all previously bonded/paired phones.
Using the button and the buttons on the ACM, proceed as follows:
1. Press MUTE/PHONE to access the main menu.
2. Use SEEK buttons to navigate to BLUETOOTH and select using MUTE/PHONE.
3. Once inside the Bluetooth directory navigate to DELETE ALL and select using MUTE/PHONE.
4. The ACM will then display "CONFIRM DEL". Press MUTE/PHONE and all previously bonded/paired
phones will then be deleted.
INCOMING CALLS
Accepting an Incoming Call
When receiving a call there are two methods of accepting the call 1) by pressing the
MUTE/PHONE button on the ACM and 2) pressing the SEND button on the SWC.
Ending a Call in Progress
To end a current call there are two methods, 1) by pressing the MUTE/PHONE button on the
ACM, and 2) pressing the END button on the SWC.