User Manual

13
TELEPHONE VOICE RECOGNITION
Defined Voice Commands
The voice control system understands predefined
commands, which need to be given exactly word
for word.
You can prompt the system to speak a selection of
these commands by activating the system and
giving the command ‘Phone help’ or ‘Telephone
help’.
Note:
For each command below, the term
‘Phone’
or ‘Telephone’ are equally acceptable. These
commands are as follows:
Telephone Commands
•Phone dial number/Dial phone number
•Phone redial/Redial
•Phone dial name/Dial name
•Phone store name
•Phone play directory/Read phone book
•Phone delete directory/Delete phone book
•Phone delete name/Delete phone name
•Phone help
Telephone Sub-Commands
These commands are used in response to a
prompt or question within a dialogue.
•Correction
•Delete
•Cancel
•Store
•Dial
•Yes
•No
•Repeat
•Numbers 0-9
•Double
•Treble/Triple
Activating The System
To switch on voice control, press
Voice
recognition
switch (arrowed) in the multi-
functional steering wheel:
•Hold the key pressed in (until the acoustic signal is
heard) to activate voice control. (Your Audio will
mute at this point). A brief acoustic signal is heard
indicating that the system is now waiting for a
spoken input.
Before giving a new voice command – except
during a dialogue - always press the steering wheel
voice control key.
Interrupting Voice Control
A command can be interrupted by speaking the
word ‘Cancel’ or by pressing the steering wheel
voice control key until the system un-mutes the
radio. It is only possible to interrupt dialogues, in
which it is possible to speak a text of your choice
e.g. name, by pressing the steering wheel key.
If you receive a telephone call while conducting a
dialogue by voice control, the telephone mode
automatically cuts in.