User Manual

Settings
73
FCC DRAFT
None—Disable security level protection.
Memory—Enable or disable memory protection.
Phone—Enable or disable phone protection.
Access codes
You can change your security code and PIN code. Avoid using codes similar to
emergency numbers such as 911 to prevent accidental dialling of the emergency
number.
Change security code
The security code controls access to features such as the security level and is
supplied with the phone. The preset code is 12345. When you change the security
code, keep the new code secret and in a safe place, separate from your phone
If you enter the wrong security code five times in succession, you will not be able
to enter a code for 5 minutes, even if you power off the phone between incorrect
entries.
1. In the standby mode, select Menu > Settings > Security > Access codes >
Change security code.
2. Enter the current security code (default is 12345), and select OK.
3. Enter the new security code (up to 10 characters), and select OK.
4. Enter the new security code again, and select OK.
Change PIN code
Before you can change your PIN code, you must enable PIN code request. See
""PIN code request," p. 72" p. 72.
1. In the standby mode, select Menu > Settings > Security > Access codes >
Change PIN code.
2. Enter the current PIN code, and select OK.
3. Enter the new PIN code, and select OK.
4. Enter the new PIN code again, and select OK.
Voice privacy
Voice privacy is a network service. See ""Network Services," p. 5" p. 5. If your
wireless service provider supports this feature, the voice privacy feature protects
the privacy of your current phone conversation from other callers placing phone