User Manual

FCC DRAFT
1 — Battery indicator
2 — Right selection text
3 — Left selection text
4 — Display indicators (these will vary)
5 — Clock
6 — Signal indicator
Shortcuts in the standby mode
In the standby mode, you can use the following shortcuts.
These shortcuts are usually not available in the active
standby mode, where the joystick is used for normal
scrolling.
To view the most recently dialed numbers, press the call
key. Scroll to a number or name, and press the call key
again to call the number.
To call your voice mailbox (network service), press and
hold 1.
To view calendar information, scroll right.
To write and send text messages, scroll left.
To open the contacts list, press the joystick.
To change the profile, press the power key briefly, and
select the profile you want to activate.
To open Services and connect to the Web, press 0.
To change these shortcuts, select Menu > Tools >
Settings > Phone > Standby mode.
Display indicators
The signal strength of the cellular network at your
current location. The higher the bar, the stronger the
signal.
The battery charge level. The higher the bar, the
stronger the charge in the battery.
You have one or more unread messages in the
Inbox folder in Messag..
You have received new e-mail in the remote mailbox.
The device keypad is locked.
The device is locked.
You have one or more missed phone calls.
22
Your device
file:///C:/USERS/MODEServer/mehowell/12100235/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 22 Mar 9, 2006 5:37:29 PMfile:///C:/USERS/MODEServer/mehowell/12100235/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 22 Mar 9, 2006 5:37:29 PM