User Manual

FCC DRAFT
To view the properties of a video clip, audio file, or Web
link, select the clip, and select Options > Clip details.
Information may include the bit rate or the Internet link
of a streaming file.
To turn on file protection, select a media clip, and
Options > Clip details > Status > Options > Change. File
protection prevents others from changing a file.
Settings
Select Menu > Media > RealPlayer > Options > Settings.
Video settings
Select Loop > On, if you want to replay video clips
automatically after they finish playing.
Connection settings
Select Connection, scroll to the following settings, and
press the joystick to edit:
• Proxy — Select whether to use a proxy server and to
key in the proxy server's IP address and port number.
• Network — Change the access point to connect to the
Internet and to set the port range used when
connecting.
Proxy settings
Proxy servers are intermediate servers between media
servers and their users. Some service providers use them
for additional security or to speed up access to Web pages
that contain media files.
Contact your service provider for the correct settings.
Select Connection > Proxy, scroll to the following settings,
and press the joystick to edit:
• Use proxy — Select Enable to use a proxy server.
• Proxy serv. address — Enter the IP address of the proxy
server. This setting is only available if you select to use
a proxy server.
• Proxy port number — Enter the port number of the
proxy server. This setting is only available if you select
to use a proxy server.
Network settings
Contact your service provider for the correct settings.
Select Connection > Network, scroll to the following
settings, and press the joystick to edit:
• Default access point — Scroll to the access point to
connect to the Internet, and press the joystick.
• Online time — Set the time when RealPlayer
disconnects from the network when you pause a
media clip that plays using a network link. Select User
defined, and press the joystick. Enter the time, and
select OK.
• Lowest UDP port — Enter the lowest port number of
the server port range. The minimum value is 1024.
• Highest UDP port — Enter the highest port number of
the server port range. The maximum value is 65535.
Advanced network settings
To edit the bandwidth values for different networks,
select Connection > Network > Options > Advanced
settings.
100
Media applications
file:///C:/USERS/MODEServer/mehowell/12100235/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 100 Mar 9, 2006 5:37:29 PMfile:///C:/USERS/MODEServer/mehowell/12100235/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 100 Mar 9, 2006 5:37:29 PM