Nokia 6111 User Guide EN 9241565 FCC draft
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-82 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life.
accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.
Contents For your safety.......................... 6 Overview of functions........................... 9 Access codes............................................ 9 Configuration settings service ........ 10 Download content and applications 11 Nokia support on the Web ............... 11 Folders.................................................... E-mail application .............................. Instant messaging (IM) ..................... Voice messages.................................... Info messages ....
Phone ...................................................... 61 Enhancements ...................................... 62 Configuration........................................ 63 Security .................................................. 64 Restore factory settings..................... 65 10. Operator menu ................ 66 11. Gallery.............................. 66 12. Media ............................... 67 Camera ................................................... 67 Media player ....................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service.
For your safety changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as text messages, multimedia messages, audio messages, instant messaging service, e-mail, presence enhanced contacts, mobile Internet services, content and application download, and synchronization with a remote Internet server, require network support for these technologies.
General information General information ■ Overview of functions Your phone provides many functions that are practical for daily use, such as a calendar, a clock, an alarm clock, a radio, and a built-in camera. Your phone also supports the following functions: • Enhanced data rates for GSM evolution (EDGE). See “Packet data,” p. 58 • Extensible hypertext markup language (XHTML). See “Web,” p. 88 • Audio messaging. See “Nokia Xpress audio messaging,” p. 31 • Instant messaging.
General information The module PIN is required to access the information in the security module. See “Security module,” p. 93. The signing PIN is required for the digital signature. See “Digital signature,” p. 94. PUK codes The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code.
General information set as default configuration settings. Otherwise, the phone asks Activate saved configuration settings?. To discard the received settings, select Exit or Show > Discard. To edit the settings, see “Configuration,” p. 63. ■ Download content and applications You may be able to download new content (for example, themes) to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions.
Get started 1. Get started ■ Open the slide phone To open the slide of the phone, push the upper part of the phone up. ■ Install SIM card and battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with BL-4B battery.
Get started 6. Insert the SIM card in the holder as shown (cut corner at the upper right). 7. Close the SIM card holder, and press it down slightly. 8. To lock the SIM card holder, slide it away from the compartment lid (1). 9. Close the SIM card compartment (2). Install battery Important: Always use original Nokia batteries. See “Nokia battery authentication guidelines,” p. 98. 1. Open the cover of the connector panel (1). 2.
Get started 4. Place the back cover in the double catch of the phone (1) and press it down slightly (2) to close the back cover. ■ Charge the battery Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. This device is intended for use when supplied with power from an AC-4 charger. For availability of approved enhancements, please check with your dealer. 1.
Get started Plug and play service When you switch on your phone for the first time, and the phone is in the standby mode, you are asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See "Connect to service provider support," p. 63, and “Configuration settings service,” p. 10. ■ Antenna Your device has an internal antenna. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on.
Your phone 2.
Your phone ■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.
Your phone To organize and change the active standby mode, activate the navigation mode and select Options > Active standby > My active standby > Options and the following options: Personalise — to assign or change phone features in the standby mode Organise — to move the position of features in the standby mode Enabling standby — select keys to enable the standby navigation mode Personal shortcut list To view the functions in the personal shortcut list, select Go to. To activate a function select it.
Your phone Indicators You received one or several text or picture messages. See “Read and reply to a SMS message,” p. 28. You received one or several multimedia messages. See “Read a MMS and reply,” p. 30. The phone registered a missed call. See “Log,” p. 50. The keypad is locked. See “Keypad lock (keyguard),” p. 20. The phone does not ring for an incoming call or text message when Incoming call alert and Message alert tone are set to Off. See “Tones,” p. 52. The alarm clock is set to On.
Your phone ■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the keypad. In the standby mode close the slide of the phone, and select Lock to lock the keys. To unlock the keypad, slide the phone open or select Unlock, and press * or OK, if slide is closed. If the Security keyguard is set On, enter the security code if requested. To answer a call when the keyguard is on, press the call key or slide the phone open.
Call functions 3. Call functions ■ Make a call 1. Enter the phone number, including the area code. For international calls, press * twice for the international prefix (the + character replaces the international access code); then enter the country code, the area code without the leading 0, if necessary, and the phone number. 2. To call the number, press the call key. 3. To end the call or to cancel the call attempt, press the end key.
Call functions To mute the ringing tone select Silence. Tip: If Divert if busy is activated to divert the calls (for example, to your voice mailbox), rejecting an incoming call also diverts the call. See “Call,” p. 61. If a compatible headset supplied with a headset key is connected to the phone, to answer and end a call, press the headset key. Call waiting To answer the waiting call (network service) during an active call, press the call key. The first call is put on hold.
Write text 4. Write text You can enter text (for example, when writing messages) using traditional or predictive text input. When using traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single key press. When you write text, appears at the top of the display, indicating predictive text input, and appears, indicating traditional text input.
Write text ■ Predictive text input Predictive text input allows you to write text quickly using the phone keypad and a built-in dictionary. 1. Start writing a word using the keys 2 to 9. Press each key only once for one letter. The phone displays * or the letter if it has a meaning as a word separately. The entered letters are displayed underlined. If you select Word suggestions as prediction type, the phone starts to predict the word you are writing.
Write text ■ Tips The following functions may also be available for writing text: • To insert a space, press 0. • To move the cursor to the left, right, down, or up, scroll in the corresponding direction. • To insert a number while in letter mode, press and hold the desired number key. • To delete a character to the left of the cursor, select Clear. To delete the characters more quickly, select and hold Clear. To delete all the characters at once when writing a message, select Options > Clear field.
Navigate the menus 5. Navigate the menus The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List or Grid. 2. Scroll through the menu, and select a submenu (for example, Settings). 3. If the menu contains submenus, select the one that you want (for example, Call). 4. If the selected menu contains further submenus, select the one that you want (for example, Anykey answer). 5.
Messaging 6. Messaging The message services can only be used if they are supported by your network or your service provider. Note: When the phone is sending the message, the animated is shown. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.
Messaging Write and send a SMS message Use the navigation key to jump from one input field or button to the next. 1. Select Menu > Messaging > Create message > Text message. 2. Enter the recipients phone number in the input field To:, or select Add to select the phone number from various lists. 3. Enter a message in the Message: input field. See “Write text,” p. 23. To insert text templates, a contact, or other items into the message, select Options.
Messaging Templates Your phone has text templates mail messages. that you can use in text or SMS e- To access the template list, select Menu > Messaging > Saved items > Templates. ■ Multimedia messages (MMS) A multimedia message can contain text, sound, a picture, a calendar note, a business card, or a video clip. If the message is too large, the phone may not be able to receive it. Some networks allow text messages that include an Internet address where you can view the multimedia message.
Messaging can contain text, one image, a calendar note, a business card, and one sound clip. To open a desired slide if the message contains several slides, select Options > Previous slide or Next slide. To set the interval between the slides, select Options > Slide timing. To move a slide component within the message, select Options > Move slide. 3. To send the message, select Send. Enter the recipients phone number in the input field To:, or select Add to select the phone number from various lists.
Messaging To view the whole message if the received message contains a presentation, a sound clip, or view a video clip, select Play. To view a business card or calendar note or to open a theme object, select Open. 3. To reply to the message, select Options > Reply > Text message, Audio message, or Multimedia. Enter the reply message, and select Send. You can send the reply message only to the person who sent you the original message. Select Options to access available options.
Messaging To save the message, select Options > Save and the folder in which you want to save the message. ■ Memory full When you are receiving a message, and the memory for the messages is full, Memory full. Unable to receive msgs. is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked.
Messaging ■ E-mail application The e-mail application (network service) allows you to access your compatible e-mail account from your phone when you are not in the office or at home. This e-mail application is different from the SMS and MMS e-mail function. Your phone supports POP3 and IMAP4 e-mail servers. Before you can send and retrieve any e-mail, you may need to do the following: • Obtain a new e-mail account or use the current one.
Messaging To download first the headings of the new e-mail messages that have been sent to your e-mail account, select Options > Check new e-mail. Then, to download the selected e-mail, mark the desired ones, and select Options > Retrieve. 3. Select the new message in Inbox. To view it later, select Back. indicates an unread message. Read and reply to e-mail Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.
Messaging select Menu > Messaging > E-mail > Options > Extra settings > Leave copy: > Delete retr. msgs. ■ Instant messaging (IM) Instant messaging (network service) is a way to send short, simple text messages to online users. Before you can use instant messaging, you must subscribe to the service. To check the availability and costs, and to subscribe to the service, contact your network operator, from whom you also receive your unique ID, password, and settings.
Messaging To disconnect from the instant messaging service, select Logout. Start an IM session Open the Instant messages menu, and connect to the service. Start the service in different ways. Select Conversations to view the list of new and read instant messages or invitations for instant messaging during the active instant messaging session. Scroll to the message or invitation that you want, and select Open to read the message. indicates the new and read group messages.
Messaging Accept or reject an invitation In the standby mode, when you are connected to the instant messaging service and you receive a new invitation, New invitation received is displayed. To read it, select Read. If more than one invitation is received, scroll to the invitation you want, and select Open. To join the private group conversation, select Accept, and enter the screen name; or to reject or delete the invitation, select Options > Reject or Delete.
Messaging To allow only the contacts on your instant messaging contact list to see you when you are online, select Availability > Avail. for contacts. To appear as being offline, select Availability > Appear offline. When you are connected to the instant messaging service, indicates that you are online, and indicates that you are not visible to others. Contacts for IM To add contacts to the instant messaging contacts list, connect to the instant messaging service, and select IM contacts.
Messaging Public groups Groups — You can bookmark public groups that your service provider may maintain. Connect to the instant messaging service, and select Public groups. Scroll to a group with which you want to chat, and select Join. If you are not in the group, enter your screen name as your nickname for the group. To delete a group from your group list, select Options > Delete group. To search for a group, select Groups > Public groups > Search groups.
Messaging ■ Service commands Select Menu > Messaging > Service commands. Write and send service requests (also known as USSD commands) to your service provider, such as activation commands for network services. ■ Delete messages To delete messages, select Menu > Messaging > Delete messages > By message to delete single messages, By folder to delete all messages from a folder, or All messages. If a folder contains unread messages, the phone asks whether you want to delete them also.
Messaging Message centres and E-mail message centres — to edit the name and number of the message and e-mail delivery centres. The number can be obtained from the network operator.
Messaging Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia reception is set to No. Configuration settings > Configuration — Only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal config. for multimedia messaging. Select Account and select a multimedia messaging service account contained in the active configuration settings.
Contacts 7. Contacts You can save names and phone numbers (Contacts) in the phone memory and in the SIM card memory. The phone memory may save contacts with numbers and text items. You can also save an image for a certain number of names. Names and numbers saved in the SIM card memory, are indicated by . ■ Search for a contact Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the first letter of the name for which you are searching.
Contacts To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. See “My presence,” p. 45. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually. To change the number type, scroll to the desired number, and select Options > Change type. To set the selected number as the default number, select Set as default. 4.
Contacts To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete > Delete number, Delete detail, or Delete image. Deleting an image from contacts does not delete it from Gallery. ■ Business cards You can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card.
Contacts Connect to 'My presence' service or Disconnect from service — to connect to or disconnect from the service View my presence — to view the status in Private pres.
Contacts The status information of the first contact on the subscribed names list is displayed. The information that the person wants to give to the others may include text and some of the following icons: , , or available. indicates that the person is available, discreet, or not indicates that the person’s presence information is not available. 2. Select Details to view the details of the selected contact; or select Options > Subscribe new, Chat, Send message, Send bus. card, or Unsubscribe.
Contacts ■ Voice dialing You can make a phone call by saying a voice tag that has been added to a phone number. Any spoken words, such as a name, can be a voice tag. The number of voice tags you can create is limited. Before using voice tags, note that: • Voice tags are not language-dependent. They are dependent on the speaker's voice. • You must say the name exactly as you said it when you recorded it. • Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment.
Contacts Make a call by using a voice tag If the phone has an application running that is sending or receiving data using a packet data connection, you must end the application before voice dialing. 1. In the standby mode, press and hold the volume down key or the right selection key. A short tone is heard, and Speak now is displayed. 2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials the phone number of the voice tag after 1.5 seconds.
Log 8. Log The phone registers the phone numbers of identified missed, received, and dialed calls; the message recipients; and the approximate length of your calls. The phone registers if it is switched on and within the network’s service area, and the network supports these functions. ■ Recent calls lists Select Menu > Log > Call log, Missed calls, Received calls, Dialled numbers, or Message Recipients to view the call lists.
Log phone displays 1 missed position request. To view the missed location request, select Show. To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > Position log > Open folder or Delete all.
Settings 9. Settings ■ Profiles Your phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles. Scroll to a profile, and select it. To activate the selected profile, select Activate. To set the profile to be active until a certain time up to 24 hours, select Timed, and set the time the profile setting shall end.
Settings tones, and Warning tones. You can find the same settings in the Profiles menu. See “Profiles,” p. 52. To set the phone to ring only for calls from phone numbers that belong to a selected caller group, select Alert for. Scroll to the caller group you want or All calls, and select Mark. Select Save to save the settings or Cancel to leave the settings unchanged. If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds.
Settings Other display settings Select Menu > Settings > Display and from the following options: Screen saver > On — to activate the screen saver for the main display. To set the time after which the screen saver is activated, select Time-out. Select Screen savers to choose an Image, a Slide set, or a Video clip from the Gallery or Digital clock to be used as screensaver. To download more images for the screen saver, select Graphic downloads. Power saver > On — to save some battery power.
Settings Navigation key To assign other phone functions from a predefined list to the navigation key, select Menu > Settings > My shortcuts > Navigation key. Enabling standby To select keys to enable the standby navigation mode, select Menu > Settings > My shortcuts > Enabling standby. Voice commands To activate phone functions by saying a voice tag, select Menu > Settings > My shortcuts > Voice commands. Select a folder, scroll to a function to which you want to add a voice tag, and select Add.
Settings Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduces the battery life. Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters.
Settings Bluetooth settings To define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's visibility or My phone's name. If you are concerned about security, turn off Bluetooth or set My phone's visibility to Hidden. Always accept only Bluetooth communication from others with whom you agree. Infrared You can set up the phone to send and receive data through its infrared (IR) port.
Settings Packet data General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an Internet protocol (IP)-based network. GPRS is a data bearer that enables wireless access to data networks such as the Internet. Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more information on availability of EGPRS and data transfer speed, contact your network operator.
Settings Data transfer and synchronisation Synchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile phone, a compatible PC, or a remote Internet server (network service)). Partner list To copy or synchronize data from your phone, the name of the device and the settings must be in the list of partners in transfer contacts.
Settings Transfer contacts — to select a contact, other than Server sync and PC sync, from the partner list to transfer data from your phone. The phone starts a synchronization or copy session. Receive data > Via Bluetooth or Via infrared — to receive data from the other phone Synchronize from a compatible PC Before you synchronize data from calendar, notes, and contacts from a compatible PC, you must install the Nokia PC Suite software of your phone on the PC.
Settings Printing — to print pictures directly from the phone using a compatible printer To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Default mode, or Printing. ■ Call Select Menu > Settings > Call and from the following options: Call divert (network service) — to divert your incoming calls. You may not be able to divert your call, if some call barring functions are active. See Call barring service in “Security,” p. 64.
Settings Memory status — to view the free memory and the used memory in Gallery, Messaging, Bookmarks, and Applications Automatic keyguard — to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Select On, and you can set the time from 5 seconds to 60 minutes. Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On.
Settings Automatic answer — to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off. Lights — to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a key press.
Settings Personal configuration settings — to add new personal accounts for various services manually, and to activate or delete them. To add a new personal account if you have not added any, select Add new; otherwise, select Options > Add new. Select the service type, and select and enter each of the required parameters. The parameters differ according to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or Activate.
Settings Authority certificates and User certificates — to view the list of the authority and user certificates downloaded into your phone. See “Certificates,” p. 94. Security module settings — See “Security module,” p. 93. ■ Restore factory settings To reset some of the menu settings to their original values, select Menu > Settings > Restore factory sett.. Enter the security code. The data you have entered or downloaded are not deleted, for example, the names and phone numbers saved in Contacts.
Operator menu 10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information contact your network operator. If this menu is not shown the following menu numbers change accordingly. The operator can update this menu with a service message. For more information, see “Service inbox,” p. 92. 11. Gallery In this menu you can manage graphics, images, recordings, video clips, themes, and tones.
Media 12. Media Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred, or forwarded. ■ Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GP format. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others. Keep a safe distance when using the flash.
Media Select Options to set Night mode on if the lighting is dim, Flash on to activate the camera flash, Self-timer on to activate the selftimer, and Img. sequence on to take photos in a fast sequence. Record a video clip To start the video recording select Record, or press the camera release key. To pause the recording, select Pause; to resume the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in Gallery > Video clips.
Media ■ Media player With the media player you can view, play, and download files, such as images, audio, video, and animated images. You can also view compatible streaming videos from a network server (network service). Select Menu > Media > Media player > Open gallery, Bookmarks, Go to address, or Media downloads. While streaming audio or video, to rewind (Rew) or fast forward (FF) scroll left or right. To set the length of a scrolling jump, select FF/Rew interval.
Media Play music tracks 1. Select Menu > Media > Music player. The details of the first track on the default track list are shown. To use the graphical keys , , , or left or right to the desired key, and select it. on the display, scroll 2. To play a track, scroll to the track that you want, and select . To adjust the volume level, use the volume keys on the side of the phone. To skip to the beginning of the next track, select beginning of the previous track, select twice. .
Media Media equaliser — to open the list of media equalizer sets. See “Equalizer,” p. 74. Loudspeaker or Headset — to listen to the music player through the loudspeaker or a compatible headset connected to the phone Tip: When using a headset, you can skip to the next track by pressing the headset key quickly.
Media Tune a radio channel 1. When the radio is on, select , or to change the radio frequency in 0.05 MHz steps, or select and hold , or to start the channel search. Searching stops when a channel is found. 2. To save the channel to a memory location 1 to 9, press and hold the corresponding number key. To save the channel in the memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key 0 to 9. 3. Enter the name of the channel, and select OK.
Media To listen to the radio using the loudspeaker or headset, select Options > Loudspeaker or Headset. Keep the headset connected to the phone. The lead of the headset functions as the radio antenna. To enter the frequency of the desired radio channel, select Options > Set frequency. You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted.
Media recordings. Select Options to select options for files in the Gallery. See “Gallery,” p. 66. ■ Equalizer To control the sound quality when using the music player, amplify or diminish frequency bands. Select Menu > Media > Equaliser. To activate a set, scroll to one of the equalizer sets, and select Activate. To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or renamed.
Push to talk 13. Push to talk Select Menu > Push to talk. Push to talk (PTT) over cellular is a two-way radio service available over a GPRS cellular network (network service). You can use PTT to have a conversation with one person or with a group of people having compatible devices. While you are connected to the PTT service, you can use the other functions of the phone. To check availability and costs, and to subscribe to the service, contact your network operator.
Push to talk Channel status: — Select Default to connect to this channel when push to talk is started, Listened to set the channel active, or Inactive to disable the channel. Chnl. security: — Select Public group or Private group. To send an invitation to the channel, select Yes when the phone requests it. You can send the invitation using a text message or IR. To add a provisioned channel, select Menu > Push to talk > Add channel > Options > Edit add. manually.
Push to talk ■ Make and receive a PTT call Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To make a channel call, a one-to-one call, or a call to multiple recipients, you must hold the PTT (volume up) key as long as you talk. To listen to the response, release the PTT (volume up) key. Talking is allowed on a first-come, first-served basis. When you stop talking, the first person to press the volume up key can talk next.
Push to talk To start a one-to-one call from the list of callback requests you have received, select Callback inbox. Scroll to the desired nickname, and press the volume up key. Make a PTT call to multiple recipients You can select multiple PTT contacts from the contact list. The recipients receive an incoming call and need to accept the call in order to participate. If supported by your network operator, you also may select contacts with a phone number but without PTT number.
Push to talk ■ Callback requests If you make a one-to-one call and do not get a response, you can send a request for the person to call you back. Send a callback request You can send a callback request in the following ways: To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a contact, and select Options > Send callback. To send a callback request from Contacts, search for the desired contact, and select Details.
Push to talk ■ Add a one-to-one contact You can save the names of persons to whom you often make one-to-one calls in the following ways: To add a PTT address to a name in Contacts, search for the desired contact, select Details > Options > Add detail > PTT address. A contact will only appear in the PTT contact list, if the PTT address is entered. To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact.
Push to talk ■ Configuration settings You may receive the settings for connecting to the service from your service provider. See “Configuration settings service,” p. 10. You can enter the settings manually. See “Configuration,” p. 63. To select the settings for connecting to the service, select Menu > Push to talk > Config. settings. Select from the following options: Configuration — to select a service provider, Default, or Personal config. for PTT service.
Organizer 14. Organizer ■ Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock. To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
Organizer week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes. Other options for the day view may be Make a note, Delete, Edit, Move, or Repeat a note; Copy a note to another day; Send note as text message or multimedia message, with IR or Bluetooth, or to the calendar of another compatible phone. In Settings you can set the date and time settings.
Organizer While viewing a note, you can also select an option to edit the deadline or priority for the note or mark the note as done. ■ Notes To use this application for writing and sending notes, select Menu > Organiser > Notes. To create a note if no note is added, select Add note; otherwise, select Options > Make a note. Write a note, and select Save. Other options for notes include deleting, and editing a note. While editing a note, you can also exit the text editor without saving the changes.
Organizer ■ Countdown timer Select Menu > Organiser > Timer. Enter the alarm time in hours, minutes, and seconds, and select OK. If you wish, write your own note text that is displayed when the time expires. To start the countdown timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer. If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the note text if it is set or Countdown time up.
Applications 15. Applications ■ Games Your phone software includes some games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open. For options related to a game, see “Other application options,” p. 87. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. To access the list of bookmarks in the Web menu, see “Bookmarks,” p. 91.
Applications Other application options Delete — to delete the application or application set from the phone Details — to view additional information about the application Update version — to check if a new version of the application is available for download from Web (network service) App. access — to restrict the application from accessing the network. Different categories are shown. Select in each category one of the available permissions.
Web 16. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these network services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size.
Web To make a connection to the service, select Menu > Web > Home; or in the standby mode, press and hold 0. To select a bookmark of the service, select Menu > Web > Bookmarks. To select the last URL, select Menu > Web > Last web address. To enter the address of the service, select Menu > Web > Go to address, enter the address of the service, and select OK. ■ Browse pages After you make a connection to the service, you can start browsing its pages.
Web ■ Appearance settings While browsing, select Options > Other options > Appear. settings; or in the standby mode, select Menu > Web > Settings > Appearance settings and from the following options: Text wrapping > On — to set the text to continue on the next line on the display. If you select Off, the text is abbreviated Font size to set the font size. Show images > No — to hide pictures on the page.
Web ■ Scripts over secure connection You can select whether to allow the running of scripts from a secure page. The phone supports WML scripts. 1. While browsing, select Options > Other options > Security settings > WMLScript sett.; or in the standby mode, select Menu > Web > Settings > Security settings > WMLScripts over secure connection. 2. To allow the scripts, select Allow. ■ Bookmarks You can save page addresses as bookmarks in the phone memory. 1.
Web Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. To save all downloaded files automatically in Gallery, select Menu > Web > Settings > Downloading settings > Automatic saving > On. ■ Service inbox The phone is able to receive service messages (pushed messages) sent by your service provider (network service).
Web ■ Cache memory A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache. To empty the cache, while browsing, select Options > Other options > Clear the cache; in the standby mode, select Menu > Web > Clear the cache.
Web Certificates Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime.
Web Check that the header text is Read and that the digital signature icon is shown. If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN. To sign the text, read all of the text first, and select Sign. The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing. Select the user certificate you want to use. Enter the signing PIN (see “Access codes,” p.
SIM services 17. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
PC connectivity 18. PC connectivity You can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through an infrared, Bluetooth wireless technology, or a USB data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ PC Suite With PC Suite you can synchronize Contacts, Calendar, To-do list, and Notes between your phone, and the compatible PC, or a remote Internet server (network service).
Battery information 19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery information the Nokia Original Enhancements logo on the packaging and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it and take it to the nearest authorized Nokia service point or dealer for assistance.
Battery information What if your battery is not authentic? If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.
Technical Information 20. Technical Information Weight 92 grams (3.2 ounces) incl. BL-4B battery Battery 700 mAh Li-Ion Battery Networks Wireless networks GSM 900, 1800 and 1900 Size Volume: Length: Width: Thickness: Frequency range (Rx) GSM 900: 925 - 960 MHz GSM1800: 1805 - 1865 MHz GSM1900: 1930 - 1990 MHz Frequency range (Tx) GSM 900: 880 - 915 MHz GSM 1800: 1710 - 1785 MHz GSM 1900: 1850 - 1910 MHz Tx output power 2 W (max) Battery voltage 3.7 V DC 4.6 cubic inches (76 ccm) 3.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information recommendations of Wireless Technology Research. Persons with pacemakers should do the following: • Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker • Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids.
Additional safety information Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.
Additional safety information ■ Certification information (SAR) THIS MODEL PHONE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by international guidelines (ICNIRP). These limits establish permitted levels of RF energy for the general population.
APPENDIX APPENDIX ■ A message from the CTIA © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
APPENDIX Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. 2. When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you. 3. Position your wireless phone within easy reach.
APPENDIX 9. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone! 10. Use your wireless phone to help others in emergencies.
APPENDIX phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects.
APPENDIX FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon.
APPENDIX exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.
APPENDIX more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption.
APPENDIX result in consumers being exposed to any known risk from the RF emitted by cellular telephones. FDA will continue to monitor studies and literature reports concerning acute effects of cell phone RF, and concerning chronic effects of long-term exposure to cellular telephone RF (that is, the risks from using a cell phone for many years).
Index Index A AAC . . . . . . . . . . . . . . . . . . . . . . . .69 access codes . . . . . . . . . . . . . . . . . .9 accessories see enhancements active standby . . . . . . . . . . . . 17, 53 navigation mode . . . . . . . . . . .17 alarm clock . . . . . . . . . . . . . . . . . .82 antenna . . . . . . . . . . . . . . . . . . . . .15 applications . . . . . . . . . . . . . . . . . .86 download . . . . . . . . . . . . . 11, 87 audio messaging . . . . . . . . . . . . . .31 B barring password . . . . . . . . .
Index service numbers . . . . . . . . . . . 49 settings . . . . . . . . . . . . . . . . . . 47 speed dialing . . . . . . . . . . . . . 49 subscribed names . . . . . . . . . 46 voice dialing . . . . . . . . . . . . . . 48 cookies . . . . . . . . . . . . . . . . . . . . . 90 countdown timer . . . . . . . . . . . . . 85 counters . . . . . . . . . . . . . . . . . . . . 50 CSD . . . . . . . . . . . . . . . . . . . . . . . . 97 customer service . . . . . . . . . . . . . 11 inbox . . . . . . . . . . . . . . . .
Index unblock . . . . . . . . . . . . . . . . . .38 Internet . . . . . . . . . . . . . . . . . . . . .88 IR . . . . . . . . . . . . . . . . . . . . . . . . . .57 port . . . . . . . . . . . . . . . . . . . . .16 J Java applications see applications K keyguard . . . . . . . . . . . . . . . . . . . .20 keypad . . . . . . . . . . . . . . . . . . . . . .16 keypad lock . . . . . . . . . . . . . . . . . .20 keys . . . . . . . . . . . . . . . . . . . . . . . .16 call key . . . . . . . . . . . . . . . . . .
Index Nokia support . . . . . . . . . . . . . . . . 11 note alarm . . . . . . . . . . . . . . . . . . 83 notes . . . . . . . . . . . . . . . . . . . . . . . 84 calendar . . . . . . . . . . . . . . . . . 83 O one-to-one contact . . . . . . . . . . . 80 operator menu . . . . . . . . . . . . . . . 66 organizer . . . . . . . . . . . . . . . . . . . . 82 alarm clock . . . . . . . . . . . . . . . 82 calculator . . . . . . . . . . . . . . . . 84 calendar . . . . . . . . . . . . . . . . . 82 calendar note . . . .
Index pacemakers . . . . . . . . . . . . . 103 vehicles . . . . . . . . . . . . . . . . 104 screen saver . . . . . . . . . . . . . . . . . .18 script settings . . . . . . . . . . . . . . . .91 scripts over secure connection . .91 scroll key see navigation key security codes . . . . . . . . . . . . . . . . .9 security module . . . . . . . . . . . . . .93 security settings . . . . . . . . . . . . . .64 selection keys . . . . . . . . . . . . 16, 17 service commands . . . . . . . . . . . .40 service inbox . .
Index visual radio . . . . . . . . . . . . . . . . . . 72 voice commands . . . . . . . . . . . . . 48 assign function to . . . . . . . . . 55 voice dialing add voice tags . . . . . . . . . . . . 48 make a call . . . . . . . . . . . . . . . 49 manage voice tags . . . . . . . . . 48 voice messages . . . . . . . . . . . . . . . 39 voice tags . . . . . . . . . . . . . . . . . . . 48 volume keys . . . . . . . . . . . . . . . . . 16 connect . . . . . . . . . . . . . . . . . . 88 wireless markup language . . . .
