Nokia 6280 User Guide 924XXXX Issue 1
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-78 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region.
Contents Contents For your safety.......................... 6 General information ................. 9 Access codes............................................ 9 Configuration settings service ........ 10 Download content and applications 10 Nokia support and contact information........................................... 11 1. Get started ......................... 12 Install the SIM card and the battery ............................................ Install a memory card........................
Contents Call........................................................... 66 Phone ...................................................... 66 Enhancements ...................................... 67 Configuration........................................ 68 Security .................................................. 69 Restore factory settings..................... 70 10.Operator menu.................. 70 11.Gallery ............................... 71 Format memory card .......................... 71 12.Media ...
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service.
For your safety Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
General information General information ■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 69. If you enter an incorrect security code five times in succession, the phone ignores further entries of the code. Wait for 5 minutes, and enter the code again.
General information If the codes are not supplied with the SIM card, contact your service provider for the codes. Barring password The barring password (4 digits) is required when you use the Call barring service. See “Security,” p. 69. You can obtain the password from your service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider or network operator.
General information respective menu descriptions. For availability of different services, pricing, and tariffs, contact your service provider. Important: Use only services that you trust and that offer adequate security and protection against harmful software. ■ Nokia support and contact information Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.
Get started 1. Get started ■ Install the SIM card and the battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with the BP-6M battery.
Get started 4. Insert the SIM card into the SIM card holder (4). Make sure that the SIM card is properly inserted and that the golden contact area on the card is facing downwards. Close the SIM card holder, and press it until it snaps into position. 5. Replace the battery (5). 6. Slide the back cover into place (6). ■ Install a memory card Your phone’s miniSD card contains pre-loaded ringtones, themes, tones, and graphics.
Get started Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. To insert the memory card, open the memory card holder as shown (1). Place the memory card in the card holder (2). Make sure that the memory card is properly inserted and that the golden contact area on the card is facing upwards.
Get started 1. Connect the charger to a wall socket. 2. Connect the lead from the charger to the CA-44 charging adapter (1), and the adapter to the socket on the bottom of your phone (2). If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. The charging time depends on the charger and the battery used.
Get started ■ Open the keypad To open the keypad, slide the phone as shown. ■ Normal operating position Use the phone only in its normal operating position. Your device has an internal antenna. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed.
Your phone 2. Your phone ■ Keys and parts • Power key (1) • Volume keys (2) • Mirror (3) • Camera lens (4) • Camera light (5) • Camera key (6) • Front camera (7) • Earpiece(8) • Left, middle, and right selection keys (9) • 4-way navigation key (10) • Call key (11) • End key (12) • Number keys (13).
Your phone ■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. • Signal strength of the cellular network (1) • Battery charge level (2) • Indicators (3) • The name of the network or the operator logo (4) • Clock (5) • Active standby (6). See “Active standby,” p. 18. • The left selection key (7) is Go to or a shortcut to another function. See “Left selection key,” p. 58. • The middle selection key (8) mode is Menu.
Your phone To change the key to access the navigation mode, see Enabling active standby in “Standby settings,” p. 57. When the arrow indicators (6) are shown, you can scroll the item left and right. Content items in navigation mode Shortcut bar — To select a shortcut, scroll to the desired function, using left/right navigation key, and select it.
Your phone • To set shortcut functions for the navigation key, see Navigation key in “My shortcuts,” p. 58. • To change the profile, briefly press the power key to open the list of profiles. Scroll to the desired profile, and select it. Power saver To set the power saving function On, see Power saver in “Display,” p. 57. Indicators You have unread messages in the Inbox folder. You have unsent, canceled, or failed messages in the Outbox folder. The phone registered a missed call.
Your phone When the infrared connection is activated, the indicator is shown continuously. A Bluetooth connection is active. If you have two phone lines, the second phone line is selected. All incoming calls are diverted to another number. The loudspeaker is activated, or the music stand is connected to the phone. Calls are limited to a closed user group. The timed profile is selected. , , , or A headset, hands-free, loopset, or music stand enhancement is connected to the phone.
Call functions 3. Call functions ■ Make a voice call 1. Enter the phone number, including the area code. For international calls, press twice for the international prefix (the + character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number. * 2. To call the number, press the call key. 3. To end the call, or to cancel the call attempt, press the end key.
Call functions Make a voice dialing call If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing. Voice commands are language-dependent. To set the language, see Voice playback language in “Phone,” p. 66. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1. In the standby mode, press and hold the right selection key.
Call functions ■ Options during a voice call Many of the options that you can use during a call are network services. For availability, contact your network operator or service provider. Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Loudspeaker, or Handset.
Call functions calls are not supported by the network, or the receiving device is not compatible) you are asked if you want to try a normal call or send a message instead. Tip: To increase or decrease the volume during a call, press the volume keys. The video call is active when you can see two video images and hear the sound through the loudspeaker. The call recipient may deny the video sending, in which case you may see a still image or a grey background graphic. You will hear the sound. 3.
Write text 4. Write text You can enter text (for example, when writing messages) using traditional or predictive text input. To use traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. When you write text, or appears at the top left of the display, indicating predictive text input, and appears, indicating traditional text input.
Write text 1. Start writing a word using the 2 to 9 keys. Press each key only once for one letter. The phone displays * or the letter if it separately has a meaning as a word. The entered letters are displayed underlined. If you selected Word suggestions as prediction type, the phone starts to predict the word you are writing. After you enter a few letters, and if these entered letters are not a word, the phone tries to predict longer words. Only the entered letters are displayed underlined.
Navigate the menus 5. Navigate the menus The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List, Grid, or Grid with labels. To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes. 2.
Messaging 6. Messaging You can read, write, send, and save text, multimedia, e-mail, audio, and flash messages. All messages are organized into folders. ■ Text messages (SMS) With the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service). Before you can send any text or SMS e-mail message, you must save your message center number. See “Message settings,” p. 45.
Messaging 3. Scroll down, and write your message in the Message: field. See “Write text,” p. 26. To insert a template into the message, select Options > Use template. 4. To send the message, select Send; or press the call key. See “Send a message,” p. 32. Read and reply to an SMS message 1 message received, or the number of new messages with messages received are shown when you have received a message. 1. To view a new message, select Show. To view it later, select Exit.
Messaging To read SIM messages, select Menu > Messaging > Options > SIM messages. ■ Multimedia messages Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. To check availability and to subscribe to the multimedia messaging network service, contact your network operator or service provider. See “Multimedia message,” p. 46.
Messaging Your phone supports multimedia messages that contain several pages (slides). A message can contain a calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. To insert a slide in the message, select New; or select Options > Insert > Slide. To insert a file in the message, select Insert or Options > Insert.
Messaging on the phone. If an interruption occurs while the message is being sent, the phone tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You can try to resend it later. Cancel message sending When the phone is saving a message in the Outbox folder, Sending message or Sending messages is displayed. To cancel the text message sending, select Cancel.
Messaging 4. To send the message, select Send; or press the call key. See “Send a message,” p. 32. ■ Memory full When you are receiving a message, and the memory for the messages is full, Memory full, not possible to receive message(s) is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked.
Messaging Write a flash message Select Menu > Messaging > Create message > Flash message. Enter the recipient’s phone number in the To: field. Write your message in the Message: field. The maximum length of a flash message is 70 characters. To send the message, select Send. Receive a flash message A received flash message is indicated with the text Message: and a few words from the beginning of the message. To read the message, select Read.
Messaging the message later, select Exit. Select Options to see the available options. ■ Instant messaging Note: This feature may not be available in your product due to your subscription . Instant messaging (IM) (network service) is a way to send short, simple text messages to online users, delivered over TCP/IP protocols. Before you can use instant messaging, you must subscribe to the service.
Messaging instant messaging service, and select My settings > Automatic login > On phone start-up. Saved conversations — to view, erase, or rename the conversations that you saved during an instant messaging session Connection settings — to edit the settings needed for messaging and presence connection Connect to instant messaging To connect to the instant messaging service, access the Instant messages menu, select the desired instant messaging service if needed, and select Login.
Messaging indicates a blocked contact. See “Block and unblock messages,” p. 40. indicates that you have received a new message from a contact. You can add contacts to the list. See “Contacts for instant messaging,” p. 40. Select Groups > Public groups (dimmed if groups are not supported by the network). The list of bookmarks to public groups provided by the network operator or service provider is displayed. To start a conversation, scroll to a group, and select Join.
Messaging with an active conversation, New instant message is displayed. To read it, select Read. If more than one message is received, the number of messages, followed by new instant messages, is displayed. Select Read, scroll to a message, and select Open. New messages received during an active conversation are held in Instant messages > Conversations. If you receive a message from someone who is not in IM contacts, the sender ID is displayed.
Messaging Contacts for instant messaging To add contacts to the instant messaging contacts list, do the following: 1. Connect to the instant messaging service, and select IM contacts. 2. Select Options > Add contact, or if you have no contacts added, select Add. Select Enter ID manually, Search from server, Copy from server, or By mobile number. When the contact is successfully added, the phone confirms it. 3. Scroll to a contact, and to start a conversation, select Chat.
Messaging To search for a group, select Groups > Search groups. You can search for a group by a member in the group or by group name, topic, or ID. Create a private group Connect to the instant messaging service, and select Groups > Create group. Enter the name for the group and the screen name that you want to use. Mark the private group members in the contacts list, and write an invitation.
Messaging Write and send an e-mail You can write your e-mail message before connecting to the e-mail service, or connect to the service first, and then write and send your e-mail. 1. Select Menu > Messaging > E-mail > Create e-mail. 2. Enter the recipient’s e-mail address, and select OK. 3. Write a subject for the e-mail, and select OK. 4. Write the e-mail message. See “Write text,” p. 26. To attach a file to the e-mail, select Options > Attach and a file from Gallery. 5.
Messaging Read and reply to e-mail Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC. 1. Select Menu > Messaging > E-mail > Inbox and the desired message. 2. While reading the message, select Options to view the available options. 3. To reply to an e-mail, select Reply > Original text or Empty screen. To reply to many, select Options > Reply to all.
Messaging ■ Voice messages The voice mailbox is a network service and you may need to subscribe to it. For more information and for your voice mailbox number, contact your service provider. To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice messages. To enter, search for, or edit your voice mailbox number, select Voice mailbox number. If supported by the network, indicates new voice messages. To call your voice mailbox number, select Listen.
Messaging To delete all messages from all folders, select Menu > Messaging > Delete messages > All messages > Yes. ■ Message settings General General settings are common for text and multimedia messages.
Messaging Message validity — to select the length of time for which the network attempts to deliver your message Messages sent via — to select the format of the messages to be sent: Text, Paging, or Fax (network service) Use packet data > Yes — to set GPRS or WCDMA as the preferred SMS bearer Character support > Full — to select all characters in the messages to be sent as viewed Reply via same centre > Yes — to allow the recipient of your message to send you a reply using your message center (network serv
Messaging Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia recept. is set to No, or Incoming multim. msgs. is set to Reject. Configuration settings > Configuration — only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal configuration for multimedia messaging. Select Account and a multimedia messaging service account contained in the active configuration settings.
Messaging Incoming server type — Select POP3 or IMAP4, depending on the type of e-mail system that you are using. If both types are supported, select IMAP4. Incoming mail settings — Select available options for POP3 or IMAP4.
Contacts 7. Contacts You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory. The phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image or a video clip for a limited number of contacts. You can also use the video clip saved with a contact as ringing tone for the contact. The SIM card memory can save names with one phone number attached to them.
Contacts 3. To add a number, select Number and a number type. To add another detail, select a text type, an image or a video clip from Gallery, or a new image. To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. See “My presence,” p. 51. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually. Enter the ID, and select OK to save it.
Contacts To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete > Delete number, Delete detail, or Delete image. Deleting an image from contacts does not delete it from Gallery. ■ My presence Note: This feature may not be available in your product due to your subscription .
Contacts Edit my presence > My availability, My presence message, My presence logo, or Show to — to change your presence status My viewers > Current viewers, Private list, or Blocked list — to view the persons who are subscribed to or blocked from your presence information Settings > Show pres. in standby, Synchronise with profiles, Connection type, or IM and my presence sett. ■ Subscribed names You can create a list of contacts whose presence status information you want to be aware of.
Contacts View subscribed names To view the presence information, see also “Search for a contact,” p. 49. 1. Select Menu > Contacts > Subscribed names. The status information of the first contact on the subscribed names list is displayed. The information that the person wants to make available to others may include text and an icon. , , or indicates that the person is available, not visible to others, or not available. indicates that the person’s presence information is not available. 2.
Contacts Memory in use — to select the SIM card or phone memory for your contacts. Select Phone and SIM to recall names and number from both memories. In that case, when you save names and numbers, they are saved in the phone memory.
Call register 8. Call register To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients. To view the approximate information on your recent communications, select Menu > Log > Call duration, Packet data counter, or Packet data timer.
Settings 9. Settings ■ Profiles Your phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles and the desired profile. Select from the following options: Activate — to activate the selected profile Personalise — to personalize the profile. Select the setting you want to change, and make the changes.
Settings To set the phone to ring only upon calls from phone numbers that belong to a selected caller group, select Alert for. Scroll to the caller group you want or All calls, and select Mark. ■ Display With display settings you can personalize your phone display view. Standby settings Select Menu > Settings > Display > Standby mode settings and from the following options: Active standby > My active standby — to display the active standby.
Settings Open camera. To download more screen savers, select Graphic downloads. To select the time after which the screen saver is activated, select Time-out. To activate the screen saver, select On. Power saver To save some battery power, select Menu > Settings > Display > Power saver. A digital clock is displayed when no function of the phone is used for a certain time.
Settings Organise — to rearrange the functions on your personal shortcut list. Scroll to the function you want to move, and select Move. Scroll to where you want to move the function, and select OK. Right selection key To select a function from the list for the right selection key, select Menu > Settings > My shortcuts > Right selection key. See also “Standby mode,” p. 18. Navigation key To select shortcut functions for the scroll keys, select Menu > Settings > My shortcuts > Navigation key.
Settings Add all or Remove all — to activate or deactivate voice commands to all functions in the voice commands list. Add all or Remove all is not shown if all voice commands are active or inactive. ■ Connectivity You can connect the phone to a compatible device using an infrared, Bluetooth wireless technology, or USB data cable (CA-53 or DKU-2) connection. You can also define the settings for packet data dial-up connections.
Settings Search for audio enhanc. — to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone. Paired devices — to search for any Bluetooth device in range. Select New to list any Bluetooth device in range. Scroll to a device, and select Pair. Enter the Bluetooth passcode of the device to associate (pair) the device to your phone. You must only give this passcode when you connect to the device for the first time.
Settings Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product. When sending or receiving data, ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices. To activate the IR port of your phone, select Menu > Settings > Connectivity > Infrared. To deactivate the IR connection, select Menu > Settings > Connectivity > Infrared.
Settings Packet data connection Select Menu > Settings > Connectivity > Packet data > Packet data connection, and from the following options: Always online to set the phone to automatically register to a packet data network when you switch on the phone. or indicates that the packet data service is available. If you receive a call or a text message, or make a call during a packet data connection, or indicates that the packet data connection is suspended (on hold).
Settings Partner list To copy or synchronize data from your phone, the name of the device and the settings must be in the list of partners in transfer contacts. If you receive data from another device (for example, a compatible mobile phone), the partner is automatically added to the list, using the contact data from the other device. Server synchronisation and PC synchronisation are the original items in the list.
Settings Receive data > Via Bluetooth or Via infrared — to receive data from the other phone Synchronize from a compatible PC Before you synchronize data from calendar, notes, and contacts from a compatible PC, you must install the Nokia PC Suite software of your phone on the PC. Use Bluetooth wireless technology, infrared, or a USB data cable for the synchronization, and start the synchronization from the PC.
Settings To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Default mode, Printing, or Data storage. ■ Call Select Menu > Settings > Call and from the following options: Call divert — to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. See Call barring service in “Security,” p. 69.
Settings To set a language for the voice playback, select Voice playback language. See “Make a voice dialing call,” p. 23 and Voice commands in “My shortcuts,” p. 58. Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On. Automatic keyguard — to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used.
Settings ■ Configuration You can configure your phone with settings that are required for certain services to function correctly. The services are multimedia messaging, instant messaging, synchronization, e-mail application, streaming, push to talk, and browser. Your service provider may also send you these settings. See “Configuration settings service,” p. 10. For information on availability and the appropriate configuration settings, contact your network operator or service provider.
Settings ■ Security When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls still may be possible to the official emergency number programmed into your device. Select Menu > Settings > Security and from the following options: PIN code request and UPIN code request — to set the phone to ask for your PIN or UPIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off.
Operator menu ■ Restore factory settings To reset some of the menu settings to their original values, select Menu > Settings > Restore factory sett.. Enter the security code. The data you have entered or downloaded, such as names and phone numbers saved in Contacts, are not deleted. 10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information, contact your network operator.
Gallery 11. Gallery In this menu you can manage graphics, images, recordings, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. The files stored in Gallery use a memory that mainly consists of the miniSD memory card in the sales box.
Media 12. Media ■ Camera You can take photos or record video clips with the built-in 2 megapixel camera. The camera produces pictures in .jpg format and video clips in .3gp format, and you can zoom up to eight times. Take a photo Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture. 1. To open the camera viewfinder, select Menu > Media > Camera.
Media This device supports an image capture resolution of 1600 x 1200 pixels. The image resolution in these materials may appear different. Record a video clip Select Menu > Media > Camera > Options > Video > Record. To pause the recording, select Pause; to resume the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in Gallery > Video clips. To change the folder for saving the recordings, see “Camera settings,” p. 73.
Media 2. Select Configuration. Only the configurations that support streaming are shown. Select a service provider, Default, or Personal configuration for streaming. 3. Select Account and a streaming service account contained in the active configuration settings. ■ Music player Your phone includes a music player for listening to music tracks, recordings, or other .mp3, .mp4, or .aac format sound files that you have transferred to the phone with the Nokia Audio Manager application. .mp3 and .
Media Music player settings In the Music player menu, the following options may be available: Play via bluetooth — to make a connection to an audio enhancement using a Bluetooth connection Track list — to view all the tracks available on the track list. To play a track, scroll to the desired track, and select Play.
Media Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Select Menu > Media > Radio. To use the graphical keys , , , or right to the desired key, and select it. on the display, scroll left or Save radio channels 1. To start the channel search, select and hold or . To change the radio frequency in 0.05 MHz steps, briefly press or . 2.
Media Visual Radio settings — to select the options for Visual Radio. To set whether the Visual Radio application starts automatically when you turn on the radio, select Enable visual service > Automatically. Stations — to select the list of saved channels. To delete or rename a channel, scroll to the desired channel, and select Options > Delete station or Rename.
Media 4. To listen to the latest recording, select Options > Play last recorded. 5. To send the last recording using infrared, Bluetooth, or a multimedia message, select Options > Send last recorded. List of recordings Select Menu > Media > Voice recorder > Options > Recordings list. The list of folders in the Gallery is shown. Open Recordings to see the list with recordings. Select Options to select options for files in the Gallery. See “Gallery,” p. 71.
Push to talk 13. Push to talk Note: This feature may not be available in your product due to your subscription . Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect, press the PTT key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the people you are calling do not have to answer the phone.
Push to talk ■ Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, you can use the phone normally, by holding it to your ear. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one calls. One-to-one calls are calls you make to only one person.
Push to talk Make a one-to-one call To start a one-to-one call from the list of contacts to which you added the PTT address, select Contacts list. Scroll to a contact, and press the PTT key. You can also select the contact from Contacts. To start a one-to-one call from the list of PTT channels, select Channel list, and scroll to the desired channel. Select Members, scroll to the desired contact, and press the PTT key.
Push to talk Send a callback request You can send a callback request in the following ways: • To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a contact, and select Options > Send callback. • To send a callback request from Contacts, search for the desired contact, select Details, scroll to the PTT address, and select Options > Send callback.
Push to talk • To add a PTT address to a name in Contacts, search for the desired contact, and select Details > Options > Add detail > Push to talk address. • To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact. • To add a contact from the channel list, connect to the PTT service, select Channel list, and scroll to the desired channel. Select Members, scroll to the member whose contact information you want to save, and select Options.
Push to talk To add a provisioned channel, select Menu > Push to talk > Add channel > Options > Edit address manually. Enter the channel address provided by your service provider. Receive an invitation When you receive a text message invitation to a group, Channel invitation received: is displayed. 1. To view the contact who sent the invitation and the channel address if the group is not a private channel, select View. 2. To add the channel to your phone, select Save. 3.
Push to talk 1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls. To make but not receive one-to-one calls, select Off. The service provider may offer some services that override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify.
Organizer 14. Organizer ■ Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock. To set the alarm, select Alarm time, enter the alarm time, and select OK. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
Organizer ■ Calendar Select Menu > Organiser > Calendar. The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in bold type, and the beginning of the note is shown below the calendar. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes.
Organizer ■ To-do list To save a note for a task that you must do, select Menu > Organiser > To-do list. To make a note if no note is added, select Add; otherwise, select Options > Add. Write the note, select Save and the priority, and set the deadline and alarm for the note. To view a note, scroll to it, and select View. You can also select an option to delete the selected note and delete all the notes that you have marked as done.
Organizer point. Select Options > Add, Subtract, Multiply, Divide, Square, Square root, or Change sign. Enter the second number. For a total, select Equals. To start a new calculation, first select and hold Clear. Convert currency Select Menu > Organiser > Calculator. To save the exchange rate, select Options > Exchange rate. Select either of the displayed options. Enter the exchange rate, press # for a decimal point, and select OK.
Organizer Split timing — to take intermediate times. To start the time observation, select Start. Select Split every time that you want to take an intermediate time. To stop the time observation, select Stop. To save the measured time, select Save. To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset. To set the stopwatch timing in the background, press the end key. Lap timing — to take lap times.
Applications 15. Applications ■ Games Your phone software includes some games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open, or press the call key. For options related to a game, see “Some application options,” p. 92. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. Select More bookmarks to access the list of bookmarks in the Web menu; see “Bookmarks,” p. 95.
Applications Some application options Delete — to delete the application from the phone Details — to give additional information about the application Update version — to check if a new version of the application is available for download from Web (network service) Web page — to provide further information or additional data for the application from an Internet page (network service). It is only shown if an Internet address has been provided with the application.
Web 16. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size.
Web 1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal configuration for browsing. See “Set up browsing,” p. 93. 3. Select Account and a browsing service account contained in the active configuration settings. 4.
Web To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *. Options while browsing Select from the following options: Home — to return to your start page Shortcuts — to open a new list of options that are specific to the page. This option is only available if the page contains shortcuts. Add bookmark — to save the page as a bookmark Bookmarks — to access the list of bookmarks. See “Bookmarks,” p. 95.
Web Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. Receive a bookmark When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. To save the bookmark, select Show > Save. To view or delete the bookmark, select Options > View or Delete.
Web JavaScript > Enable — to enable the Java scripts ■ Security settings Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 98. While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject.
Web To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and to activate the browser and download the marked content, select Retrieve. To display detailed information on the service notification or to delete the message, select Options > Details or Delete. Service inbox settings Select Menu > Web > Settings > Service inbox settings. To set whether you want to receive service messages, select Service messages > On or Off.
Web Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider. To view or change the security module settings, select Menu > Settings > Security > Security module settings.
SIM services Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to sign is shown, which may include the amount and date. Check that the header text is Read and that the digital signature icon is shown.
PC connectivity 18. PC connectivity You can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through an IR, Bluetooth, or USB data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ Nokia PC Suite With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote Internet server (network service).
Battery information 19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery information ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
Battery information 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276. National and international operator charges will apply. You should receive a message indicating whether the code can be authenticated.
Technical Information 20. Technical Information Weight 115 grams (4.1 ounces) incl. BP-6M battery Battery 970 mAh Li-Ion Battery Networks Wireless networks GSM 900, 1800 and 1900, WCDMA2100 Size Volume: Length: Width: Thickness: Networks GSM 900 GSM1800 GSM1900 WCDMA2100 Tx output power 2 W (max) Battery voltage 3.7 V DC Memory size 64 MB miniSD (max. 2 GB) 6 MB RAM Operating temperature 59 °F to 77 °F (15 °C to 25 °C) 5.6 cubic inches (91 ccm) 3.9 in (100 mm) 1.8 in (46 mm) 0.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information recommendations of Wireless Technology Research. Persons with pacemakers should do the following: • Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker • Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids.
Additional safety information Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked.
Additional safety information permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards and guidelines include a substantial safety margin designed to assure the safety of the public, regardless of age and health and to account for any variations in measurements.
Appendix Appendix ■ A message from the CTIA © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
Appendix When it comes to the use of wireless phones, safety is your most important call. Wireless phone "Safety Tips" 1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. 2.
Appendix times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car.
Appendix stolen, call roadside assistance or other special non-emergency wireless number. Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens.
Appendix What is FDA's role concerning the safety of wireless phones? Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user.
Appendix exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones.
Appendix key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance.
Appendix then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.
Appendix the phone. This difference between the RF test measurement and actual RF emission is because test measurements are limited by instrument accuracy, because test measurement and actual use environments are different, and other variable factors. This inherent variability is known as “measurement uncertainty.” When FCC conducts post-grant testing of a cell phone, FCC takes into account any measurement uncertainty to determine whether regulatory action is appropriate.
